On Mon, 26 Apr 1999, Eduardo Trettel wrote:
> I've already read this doc, but it describes the ISA version of the board,
> which is much easier to configure, as long as the I/0 addresses are the
> same of the SB16. I'm not sure how to handle this on the PCI version.
> Any hints will be welcomed.
Isn't this set up by the pci subsystem? If so, then try looking at
/proc/pci to get the io port and interrupt. If not, it may not actually
*be* pci.
Note: you could try assigning an interrupt to it in bios
( If the kernel driver doesn't work, you could try alsa at
http://www.alsa-project.org )
--
Understanding is a three edged sword. Do you *want* to get the point?
http://www.albatross.co.nz/~psycho/ O-
