If controller hold in reset it's not possible to write any register except CTRL. So all other registers must be updated only after controller bring out from reset.
Signed-off-by: Anton Bondarenko <[email protected]> --- drivers/spi/spi-imx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 410522f..3aa33c8 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -356,6 +356,9 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, else cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(config->cs); + /* CTRL register always go first to bring out controller from reset */ + writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); + reg = readl(spi_imx->base + MX51_ECSPI_TESTREG); if (config->mode & SPI_LOOP) reg |= MX51_ECSPI_TESTREG_LBC; @@ -363,7 +366,6 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, reg &= ~MX51_ECSPI_TESTREG_LBC; writel(reg, spi_imx->base + MX51_ECSPI_TESTREG); - writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG); /* -- 2.6.3 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
