On Wed, Sep 01, 2021 at 11:18:24AM +0200, Maxime Ripard wrote:
> The Silead GSL1680 Touchscreen Controller is supported by Linux thanks
> to its device tree binding.
>
> Now that we have the DT validation in place, let's convert the device
> tree bindings for that driver over to a YAML schema.
>
> Cc: Dmitry Torokhov <dmitry.torok...@gmail.com>
> Cc: linux-in...@vger.kernel.org
> Signed-off-by: Maxime Ripard <max...@cerno.tech>
>
> ---
>
> Changes from v1:
> - Added maximum to the number of fingers
> ---
> .../input/touchscreen/silead,gsl1680.yaml | 91 +++++++++++++++++++
> .../input/touchscreen/silead_gsl1680.txt | 44 ---------
> 2 files changed, 91 insertions(+), 44 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
> delete mode 100644
> Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
>
> diff --git
> a/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
> b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
> new file mode 100644
> index 000000000000..cc064696ac28
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
> @@ -0,0 +1,91 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/touchscreen/silead,gsl1680.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Silead GSL1680 Touchscreen Controller Device Tree Bindings
> +
> +maintainers:
> + - Dmitry Torokhov <dmitry.torok...@gmail.com>
> +
> +allOf:
> + - $ref: touchscreen.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - silead,gsl1680
> + - silead,gsl1688
> + - silead,gsl3670
> + - silead,gsl3675
> + - silead,gsl3692
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + power-gpios:
> + maxItems: 1
> +
> + firmware:
Should be 'firmware-name'
> + $ref: /schemas/types.yaml#/definitions/string
> + description: >
> + File basename for board specific firmware
> +
> + silead,max-fingers:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + maximum: 5
> + description: >
> + Maximum number of fingers the touchscreen can detect
> +
> + silead,home-button:
> + type: boolean
> + description: >
> + Does the device have a capacitive home-button build into the
> + touchscreen?
> +
> + avdd-supply:
> + description: >
> + Regulator phandle for controller AVDD
> +
> + vddio-supply:
> + description: >
> + Regulator phandle for controller VDDIO
> +
> +unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - power-gpios
> + - touchscreen-size-x
> + - touchscreen-size-y
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + touchscreen@40 {
> + compatible = "silead,gsl1680";
> + reg = <0x40>;
> + interrupt-parent = <&pio>;
> + interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>;
> + power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
> + touchscreen-size-x = <480>;
> + touchscreen-size-y = <800>;
> + touchscreen-inverted-x;
> + touchscreen-swapped-x-y;
> + silead,max-fingers = <5>;
> + };
> + };
> +
> +...
> diff --git
> a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
> b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
> deleted file mode 100644
> index d67e558e5ab5..000000000000
> --- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
> +++ /dev/null
> @@ -1,44 +0,0 @@
> -* GSL 1680 touchscreen controller
> -
> -Required properties:
> -- compatible : Must be one of the following, depending on the
> model:
> - "silead,gsl1680"
> - "silead,gsl1688"
> - "silead,gsl3670"
> - "silead,gsl3675"
> - "silead,gsl3692"
> -- reg : I2C slave address of the chip (0x40)
> -- interrupts : interrupt specification for the gsl1680 interrupt
> -- power-gpios : Specification for the pin connected to the
> gsl1680's
> - shutdown input. This needs to be driven high to
> take the
> - gsl1680 out of its low power state
> -- touchscreen-size-x : See touchscreen.txt
> -- touchscreen-size-y : See touchscreen.txt
> -
> -Optional properties:
> -- firmware-name : File basename (string) for board specific
> firmware
> -- touchscreen-inverted-x : See touchscreen.txt
> -- touchscreen-inverted-y : See touchscreen.txt
> -- touchscreen-swapped-x-y : See touchscreen.txt
> -- silead,max-fingers : maximum number of fingers the touchscreen can detect
> -- silead,home-button : Boolean, set to true on devices which have a
> - capacitive home-button build into the touchscreen
> -- vddio-supply : regulator phandle for controller VDDIO
> -- avdd-supply : regulator phandle for controller AVDD
> -
> -Example:
> -
> -i2c@00000000 {
> - gsl1680: touchscreen@40 {
> - compatible = "silead,gsl1680";
> - reg = <0x40>;
> - interrupt-parent = <&pio>;
> - interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>;
> - power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
> - touchscreen-size-x = <480>;
> - touchscreen-size-y = <800>;
> - touchscreen-inverted-x;
> - touchscreen-swapped-x-y;
> - silead,max-fingers = <5>;
> - };
> -};
> --
> 2.31.1
>
>
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/YTJ480gSJDiaJq0d%40robh.at.kernel.org.
