Hi ma haijun, My wifi chip ap6210 is not working.
Here My log regarding wifi: wakeup src cnt is : 0. [ 0.373732] [wifi]: select wifi: ap6210 !! [ 0.374115] [ap6xxx]: module power name [ 0.374134] [ap6xxx]: ap6xxx module power set by axp. [ 0.374151] [ap6xxx]: get power regulator failed. [ 0.374182] [wifi_pm]: wifi gpio init is OK !! [ 3.230488] [ap6xxx]: succeed to set gpio ap6xxx_wl_regon to 1 ! [ 3.335739] [ap6xxx]: sdio wifi power state: on [ 3.347909] =========== WLAN placed in POWER ON ======== [ 5.344407] failed to power up wifi chip puneet , retry again (4 left) ** [ 5.362732] [ap6xxx]: succeed to set gpio ap6xxx_wl_regon to 0 ! [ 5.472678] [ap6xxx]: sdio wifi power state: off [ 5.477309] sw_mci_rescan_card [ 5.480381] =========== WLAN placed in POWER OFF ======== [ 5.508189] [ap6xxx]: succeed to set gpio ap6xxx_wl_regon to 1 ! [ 5.514829] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 5.613428] [ap6xxx]: sdio wifi power state: on [ 5.617975] [dhd_customer_gpio_wlan_ctrl 175] [ 5.622329] sw_mci_rescan_card [ 5.625429] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 5.625607] =========== WLAN placed in POWER ON ======== [ 7.624396] failed to power up wifi chip puneet , retry again (3 left) ** [ 7.755725] =========== WLAN placed in POWER OFF ======== [ 7.770976] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON [ 7.779202] [dhd_customer_gpio_wlan_ctrl 173] [ 7.783567] [ap6xxx]: succeed to set gpio ap6xxx_wl_regon to 1 ! [ 7.907814] [ap6xxx]: sdio wifi power state: on [ 7.912346] [dhd_customer_gpio_wlan_ctrl 175] [ 7.919968] =========== WLAN placed in POWER ON ======== [ 9.924386] failed to power up wifi chip puneet , retry again (2 left) ** [ 9.924393] [ 9.934429] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn off WL_REG_ON [ 9.942702] [ap6xxx]: succeed to set gpio ap6xxx_wl_regon to 0 ! [ 10.047959] [ap6xxx]: sdio wifi power state: off [ 10.052580] sw_mci_rescan_card [ 10.055683] =========== WLAN placed in POWER OFF ======== [ 10.070930] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON [ 10.079160] [dhd_customer_gpio_wlan_ctrl 173] [ 10.083525] [ap6xxx]: succeed to set gpio ap6xxx_wl_regon to 1 ! [ 10.090003] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 10.197856] [ap6xxx]: sdio wifi power state: on [ 10.202394] [dhd_customer_gpio_wlan_ctrl 175] [ 10.206764] sw_mci_rescan_card [ 10.209857] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 10.210031] =========== WLAN placed in POWER ON ======== [ 12.204443] failed to power up wifi chip puneet , retry again (1 left) ** [ 12.204450] [ 12.339882] =========== WLAN placed in POWER OFF ======== [ 12.354794] failed to power up wifi chip puneet, max retry reached, exits ** I used sane script what you shared, with that script my ethernet is working fine, and i used same source code what hummingbird people shared with me. Can you share what you are getting on you console regarding wifi. Regards Punith -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
