Hi Patwood,
 In my himming bird board android is booting fine from NAND.

so i tried to install ubuntu in NAND by this link.

https://www.miniand.com/forums/forums/development/topics/boot-ubuntu-lubuntu-from-internal-4g-flash?page=2

My steps:
1>i booted ubuntu from sdcard.
2>./nand-partv /dev/nand 'linux 8000000'
3>remove sdcard 
4>booted from NAND.

i did not done any changes in nanda partition.
(i check by mounting nanda also , but u-boot is not evoked).

in log:

U-Boot 2014.01-rc1-09161-gaf9f405-dirty (Feb 19 2014 - 19:20:31) Allwinner 
Technology

CPU:   Allwinner A20 (SUN7I)
Board: embdes
I2C:   ready
DRAM:  1 GiB
HELLO! BOOT0 is starting!
boot0 version : 2.0.0 � 
read dram para.
dram size =1024MB
0x01a48608
super_standby_flag = 0
Succeed in opening nand flash.
block from 2 to 6
deal block 2
Succeed in reading Boot1 file head.
The size of Boot1 is 0x00068000.
The file stored in 0x00000000 of block 2 is perfect.
Check is correct.
Ready to disable icache.
Succeed in loading Boot1.
Jump to Boot1.
[       0.150] boot1 version : 2.0.0
[       0.159] script installed early ok
[       0.160] pmu type = 3
[       0.161] bat vol = 0 mv
[       0.179] axi:ahb:apb=4:2:2
[       0.179] set dcdc2=1400mv, clock=912M successed
[       0.181] key
[       0.194] no key found
[       0.194] flash init start
[       2.177] flash init finish
[       2.203] fs init ok
[       2.531] fattype FAT16
[       2.531] fs mount ok
[       2.536] nand good_block_ratio=944
[       2.536] storage_type=0
[       2.587] 0
[       2.601] set pc
[       2.603] usbdc_vol = 4000, usbdc_cur = 0
[       2.603] usbpc_vol = 4400, usbpc_cur = 0
[       2.606] init to usb pc
[       2.609] set pc
[       2.804] battery enough
[       2.804] power_start=0x00000001
[       2.804] key value = 0
[       2.807] recovery key high 40, low 4
[       2.901] show pic finish
[       2.901] load kernel start
[       2.930] load kernel successed
[       2.931] start address = 0x4a000000
[       2.933] boot1: bad boot image magic, maybe not a boot.img?
[       2.942] power exit detect
[       2.942] usb exit detect
[       2.944] try to fel in 1 secend

Booting stop here.

Regards
Punith

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

Reply via email to