On Monday 10 March 2014 15:41:51 Maxime Ripard wrote: > +/* > + * Hardware representation of the LLI > + * > + * The hardware will be fed the physical address of this structure, > + * and read its content in order to start the transfer. > + */ > +struct sun6i_dma_lli { > + u32 cfg; > + u32 src; > + u32 dst; > + u32 len; > + u32 para; > + u32 p_lli_next; > + struct sun6i_dma_lli *v_lli_next; > +} __packed;
It looks strange to have a pointer in a hardware structure, since the pointer doesn't make sense to the device. Also, the '__packed' attribute seems strange. Are you sure you want to reduce the alignment from 4 bytes to 1 byte? > +static irqreturn_t sun6i_dma_interrupt(int irq, void *dev_id) > +{ > + struct sun6i_dma_dev *sdev = dev_id; > + struct sun6i_vchan *vchan; > + struct sun6i_pchan *pchan; > + int i, j, ret = IRQ_NONE; > + u32 status; > + > + for (i = 0; i < 2; i++) { > + status = readl(sdev->base + DMA_IRQ_STAT(i)); > + if (!status) > + continue; > + > + dev_dbg(sdev->slave.dev, "DMA irq status %s: 0x%x\n", > + i ? "high" : "low", status); > + > + writel(status, sdev->base + DMA_IRQ_STAT(i)); > + > + for (j = 0; (j < 8) && status; j++) { > + if (status & DMA_IRQ_QUEUE) { > + pchan = sdev->pchans + j; > + vchan = pchan->vchan; > + > + if (vchan) { > + unsigned long flags; > + > + spin_lock_irqsave(&vchan->vc.lock, > + flags); Interrupts are already disabled here. > + sdc->clk = devm_clk_get(&pdev->dev, NULL); > + if (IS_ERR(sdc->clk)) { > + dev_err(&pdev->dev, "No clock specified\n"); > + return PTR_ERR(sdc->clk); > + } > + > + mux = devm_clk_get(&pdev->dev, "ahb1_mux"); > + if (IS_ERR(mux)) { > + dev_err(&pdev->dev, "Couldn't get AHB1 Mux\n"); > + return PTR_ERR(mux); > + } > + > + pll6 = devm_clk_get(&pdev->dev, "pll6"); > + if (IS_ERR(pll6)) { > + dev_err(&pdev->dev, "Couldn't get PLL6\n"); > + return PTR_ERR(pll6); > + } > + > + ret = clk_set_parent(mux, pll6); > + if (ret) { > + dev_err(&pdev->dev, "Couldn't reparent AHB1 on PLL6\n"); > + return ret; > + } Neither "pll6" nor "ahb1_mux" are listed in the DT binding. Also, why is it the driver's business to set the parent? Arnd -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.