Hi, On 03/10/2014 06:34 PM, Chen-Yu Tsai wrote: > On Mon, Mar 10, 2014 at 6:25 PM, Hans de Goede <hdego...@redhat.com> wrote: >> Hi, >> >> On 03/10/2014 11:04 AM, Kaspter Ju wrote: >>> Hi Hans, >>> >>> On 03/09/2014 03:41 PM, Hans de Goede wrote: >>>> Hi Maxime, >>>> >>>> Yesterday I've been playing a bit with my Mele A1000G Quad, with the >>>> purpose of >>>> trying to get usb and mmc working there. I already have wens' gmac patches >>>> for the >>>> A31 in my tree, so for starters I tried to get that to work. >>>> >>>> Unfortunately the fex shows that the phy is powered by dldo1 from the >>>> pmic, and by >>>> default that is configured to off. So I got stuck there wrt getting the >>>> gmac to work >>>> on the A1000G Quad / M9. >>>> >>>> Do you know if anyone is working on pmic support for the A31, or for the >>>> new push-pull >>>> serial bus this uses? >>>> >>>> Is this bus similar enough to i2c that we can use the i2c subsys for this, >>>> maybe with >>>> an extra controller flag, or do we need to likely write a whole new subsys >>>> for this ? >>>> >>>> Also do you know of a datasheet for the AXP221 somewhere ? >>> >>> There is a Chinese version datasheet in github >>> >>> https://github.com/OLIMEX/OLINUXINO/tree/master/HARDWARE/A31-PDFs >> >> Ah, that is good to know. > > I created an AXP221 page on the wiki: http://linux-sunxi.org/AXP221 > > I put in most of the tables from the datasheet. A lot of it was > copy-pasted from the AXP209 > page, then updated and cleaned up. The register ranges remain mostly > the same, however some > bit offsets were moved around, and some value ranges were changed. > > The regulators, interrupts, and most of the registers should be > complete. I know the battery > level stuff is still missing. And all the wording and figures are > still missing as well. > Hopefully I'll finish the translation this week.
Great, many thanks for working on this! Regards, Hans -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.