[linux-sunxi] Re: [PATCH v5 8/8] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards

[Maxime Ripard]

Hi,

On Thu, May 01, 2014 at 02:29:34PM +0200, Carlo Caione wrote:
> Signed-off-by: Hans de Goede <hdego...@redhat.com>
> Signed-off-by: Carlo Caione <ca...@caione.org>
> ---
>  arch/arm/boot/dts/sun4i-a10-a1000.dts           | 58 ++++++++++++++++++++++
>  arch/arm/boot/dts/sun4i-a10-cubieboard.dts      | 58 ++++++++++++++++++++++
>  arch/arm/boot/dts/sun4i-a10-hackberry.dts       | 64 ++++++++++++++++++++++++
>  arch/arm/boot/dts/sun4i-a10-inet97fv2.dts       | 58 ++++++++++++++++++++++
>  arch/arm/boot/dts/sun4i-a10-mini-xplus.dts      | 65 
> +++++++++++++++++++++++++
>  arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts  | 64 ++++++++++++++++++++++++
>  arch/arm/boot/dts/sun4i-a10-pcduino.dts         | 58 ++++++++++++++++++++++
>  arch/arm/boot/dts/sun7i-a20-cubieboard2.dts     | 59 ++++++++++++++++++++++
>  arch/arm/boot/dts/sun7i-a20-cubietruck.dts      | 59 ++++++++++++++++++++++
>  arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 59 ++++++++++++++++++++++
>  10 files changed, 602 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts 
> b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> index fa746aea..57d3fb4 100644
> --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> @@ -88,6 +88,56 @@
>                       pinctrl-names = "default";
>                       pinctrl-0 = <&i2c0_pins_a>;
>                       status = "okay";
> +
> +                     axp209: pmic@34 {
> +                             compatible = "x-powers,axp209";
> +                             reg = <0x34>;
> +                             interrupts = <0>;
> +
> +                             interrupt-controller;
> +                             #interrupt-cells = <1>;
> +
> +                             acin-supply = <&reg_axp_ipsout>;
> +                             vin2-supply = <&reg_axp_ipsout>;
> +                             vin3-supply = <&reg_axp_ipsout>;
> +                             ldo24in-supply = <&reg_axp_ipsout>;
> +                             ldo3in-supply = <&reg_axp_ipsout>;
> +                             ldo5in-supply = <&reg_axp_ipsout>;
> +
> +                             regulators {
> +                                     x-powers,dcdc-freq = <1500>;
> +
> +                                     axp_vcore_reg: dcdc2 {
> +                                             regulator-min-microvolt = 
> <700000>;
> +                                             regulator-max-microvolt = 
> <2275000>;
> +                                             regulator-always-on;
> +                                     };
> +
> +                                     axp_ddr_reg: dcdc3 {
> +                                             regulator-always-on;
> +                                     };
> +
> +                                     axp_rtc_reg: ldo1 {
> +                                             regulator-always-on;
> +                                     };
> +
> +                                     axp_analog_reg: ldo2 {
> +                                             regulator-always-on;
> +                                     };
> +
> +                                     axp_pll_reg: ldo3 {
> +                                             regulator-always-on;
> +                                     };
> +
> +                                     axp_hdmi_reg: ldo4 {
> +                                             regulator-always-on;
> +                                     };
> +
> +                                     axp_mic_reg: ldo5 {
> +                                             regulator-always-on;

Do all these regulators need to be always on? It makes sense for the
pll and vcore, but I don't get why the mic and hdmi regulators need
this.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

signature.asc
Description: Digital signature