On Monday, May 26, 2014 4:27:24 PM UTC-4, Terry Fisher wrote: > Mele M5 fex file. Memory parameters are extracted from Mele's V3.1.2 > firmware update script.bin. > > --- > > sys_config/a20/mele_m5.fex | 1019 > ++++++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 1019 insertions(+) > > create mode 100644 sys_config/a20/mele_m5.fex > > [...] > > +auto_hpd = 0 > > + > > -- > > 1.8.5.5
The following patch updates the output type and output mode of screen1, changing it from LCD/720p50 to Composite/NTSC. It also removes the [boot_disp] section from the mele_m5.fex file as this section isn't used in the related mele_a1000 files and the M5 works fine without it. This is an incremental patch and should be applied after the original patch in this thread. Regards, Terry --- sys_config/a20/mele_m5.fex | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/sys_config/a20/mele_m5.fex b/sys_config/a20/mele_m5.fex index 0e05fff..a0f5e65 100644 --- a/sys_config/a20/mele_m5.fex +++ b/sys_config/a20/mele_m5.fex @@ -324,8 +324,8 @@ disp_init_enable = 1 disp_mode = 0 screen0_output_type = 3 screen0_output_mode = 5 -screen1_output_type = 1 -screen1_output_mode = 4 +screen1_output_type = 2 +screen1_output_mode = 14 fb0_framebuffer_num = 3 fb0_format = 10 fb0_pixel_sequence = 0 @@ -1011,9 +1011,3 @@ env_sub01 = "specialstr" [dynamic] MAC = "000000000000" - -[boot_disp] -output_type = 4 -output_mode = 3 -auto_hpd = 0 - -- 1.8.5.5 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
