The Allwinner A31 and A23 SoCs have a reset controller
maintaining the UART in reset by default.
This patch adds optional reset support to the driver.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt | 1 +
drivers/tty/serial/8250/8250_dw.c | 9 +++++++++
2 files changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
index f13f1c5..cb9af84 100644
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
@@ -7,6 +7,7 @@ Required properties:
- clock-frequency : the input clock frequency for the UART.
Optional properties:
+- resets : phandle to the parent reset controller.
- reg-shift : quantity to shift the register offsets by. If this property is
not present then the register offsets are not shifted.
- reg-io-width : the size (in bytes) of the IO accesses that should be
diff --git a/drivers/tty/serial/8250/8250_dw.c
b/drivers/tty/serial/8250/8250_dw.c
index 51b307a..cb1b3dc 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -26,6 +26,7 @@
#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/clk.h>
+#include <linux/reset.h>
#include <linux/pm_runtime.h>
#include <asm/byteorder.h>
@@ -59,6 +60,7 @@ struct dw8250_data {
int last_mcr;
int line;
struct clk *clk;
+ struct reset_control *rst;
struct uart_8250_dma dma;
};
@@ -408,6 +410,10 @@ static int dw8250_probe(struct platform_device *pdev)
uart.port.uartclk = clk_get_rate(data->clk);
}
+ data->rst = devm_reset_control_get_optional(&pdev->dev, NULL);
+ if (!IS_ERR(data->rst))
+ reset_control_deassert(data->rst);
+
data->dma.rx_chan_id = -1;
data->dma.tx_chan_id = -1;
data->dma.rx_param = data;
@@ -451,6 +457,9 @@ static int dw8250_remove(struct platform_device *pdev)
serial8250_unregister_port(data->line);
+ if (!IS_ERR(data->rst))
+ reset_control_assert(data->rst);
+
if (!IS_ERR(data->clk))
clk_disable_unprepare(data->clk);
--
2.0.0
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
