This patch series adds USB Host EHCI support to the sunxi SoCs. It was
tested on Cubietruck. Now you could boot from a USB stick or use a
compatible Ethernet dongle to add a second Ethernet port in U-Boot.
Best,
Roman Byshko
Changes since v2:
- improved commit messages
- removed BIT macro
- added get_io_base function
- removed unnecessary verboseness when defining sunxi_echi_hcd
array
- the EHCI driver is now based on [2] and uses GPIO driver
- possible failure is ruled out by introducing enabled_hcd_count
Changes since v1:
- fixed erroneous copyright author
- used SPDX tag instead of the full license
- used setbits_le32/clrbits_le32 instead of direct bit poking
- usage of setbits_le32/clrbits_le32 automatically fixed bug
where usbc_bit was clobbered unintentionally
- added more info about commented out gpio_direction_output, it
will be used once [1] is applied against upstream
[1] http://patchwork.ozlabs.org/patch/356566/
[2] http://git.denx.de/u-boot-sunxi.git/
Roman Byshko (5):
sunxi: add defines to control USB Host clocks/resets
sunxi: add USB EHCI driver
sunxi: add general USB settings
sun7i: add USB EHCI settings
sun7i: cubietruck: enable USB EHCI
arch/arm/include/asm/arch-sunxi/clock_sun4i.h | 4 +
boards.cfg | 2 +-
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-sunxi.c | 196 ++++++++++++++++++++++++++
include/configs/sun7i.h | 8 ++
include/configs/sunxi-common.h | 6 +
6 files changed, 216 insertions(+), 1 deletion(-)
create mode 100644 drivers/usb/host/ehci-sunxi.c
--
2.0.0
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
