Hi, I successfully built the u-boot Bootloader as described here: http://linux-sunxi.org/U-Boot#Compilation
Now I'm getting this Output: U-Boot SPL 2014.04-10718-g7ba0c86 (Sep 14 2014 - 12:11:29) Board: A20-OLinuXino-Lime DRAM: 512 MiB CPU: 960000000Hz, AXI/AHB/APB: 3/2/2 spl: not an uImage at 1600 U-Boot 2014.04-10718-g7ba0c86 (Sep 14 2014 - 12:11:29) Allwinner Technology CPU: Allwinner A20 (SUN7I) Board: A20-OLinuXino-Lime I2C: ready DRAM: 512 MiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: emac Hit any key to stop autoboot: 0 reading uEnv.txt 240 bytes read in 17 ms (13.7 KiB/s) Loaded environment from uEnv.txt Running uenvcmd ... reading uImage 2601384 bytes read in 175 ms (14.2 MiB/s) reading dtb 17570 bytes read in 27 ms (634.8 KiB/s) ## Booting kernel from Legacy Image at 46000000 ... Image Name: ARM OpenWrt Linux-3.14.18 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2601320 Bytes = 2.5 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 49000000 Booting using the fdt blob at 0x49000000 Loading Kernel Image ... OK Using Device Tree in place at 49000000, end 490074a1 Starting kernel ... I figure I need to get the correct dtb File for this A20 Lime Board. Where can I download / get that from? I could not figure out how to include the A20-Lime correctly into openwrt, sadly... Thanks, N -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
