The MBUS clock on sun8i is slightly different from the old mod0 clocks. The divider is 3 bits wider, while also needing a divider table for the higher 4 values, which all set the same divider.
Signed-off-by: Chen-Yu Tsai <w...@csie.org> --- Documentation/devicetree/bindings/clock/sunxi.txt | 1 + drivers/clk/sunxi/Makefile | 1 + drivers/clk/sunxi/clk-sun8i-mbus.c | 78 +++++++++++++++++++++++ 3 files changed, 80 insertions(+) create mode 100644 drivers/clk/sunxi/clk-sun8i-mbus.c diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 425b109..fb3b7aa 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -50,6 +50,7 @@ Required properties: "allwinner,sun4i-a10-mmc-output-clk" - for the MMC output clock on A10 "allwinner,sun4i-a10-mmc-sample-clk" - for the MMC sample clock on A10 "allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks + "allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23 "allwinner,sun7i-a20-out-clk" - for the external output clocks "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31 "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20 diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile index 833f086..7ddc2b5 100644 --- a/drivers/clk/sunxi/Makefile +++ b/drivers/clk/sunxi/Makefile @@ -6,6 +6,7 @@ obj-y += clk-sunxi.o clk-factors.o obj-y += clk-a10-hosc.o obj-y += clk-a20-gmac.o obj-y += clk-mod0.o +obj-y += clk-sun8i-mbus.o obj-$(CONFIG_MFD_SUN6I_PRCM) += \ clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o \ diff --git a/drivers/clk/sunxi/clk-sun8i-mbus.c b/drivers/clk/sunxi/clk-sun8i-mbus.c new file mode 100644 index 0000000..8e49b44 --- /dev/null +++ b/drivers/clk/sunxi/clk-sun8i-mbus.c @@ -0,0 +1,78 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai <w...@csie.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/of_address.h> + +#include "clk-factors.h" + +/** + * sun8i_a23_get_mbus_factors() - calculates m factor for MBUS clocks + * MBUS rate is calculated as follows + * rate = parent_rate / (m + 1); + */ + +static void sun8i_a23_get_mbus_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 div; + + /* + * These clocks can only divide, so we will never be able to + * achieve frequencies higher than the parent frequency + */ + if (*freq > parent_rate) + *freq = parent_rate; + + div = DIV_ROUND_UP(parent_rate, *freq); + + if (div > 8) + div = 8; + + *freq = parent_rate / div; + + /* we were called to round the frequency, we can now return */ + if (m == NULL) + return; + + *m = div - 1; +} + +static struct clk_factors_config sun8i_a23_mbus_config = { + .mshift = 0, + .mwidth = 3, +}; + +static const struct factors_data sun8i_a23_mbus_data __initconst = { + .enable = 31, + .mux = 24, + .table = &sun8i_a23_mbus_config, + .getter = sun8i_a23_get_mbus_factors, +}; + +static DEFINE_SPINLOCK(sun8i_a23_mbus_lock); + +static void __init sun8i_a23_mbus_setup(struct device_node *node) +{ + struct clk *mbus = sunxi_factors_register(node, &sun8i_a23_mbus_data, + &sun8i_a23_mbus_lock); + + /* The MBUS clocks needs to be always enabled */ + __clk_get(mbus); + clk_prepare_enable(mbus); +} +CLK_OF_DECLARE(sun8i_a23_mbus, "allwinner,sun8i-a23-mbus-clk", sun8i_a23_mbus_setup); -- 2.1.0 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.