This is a 7" tablet with Allwinner A20 SoC. More details at http://linux-sunxi.org/MSI_Primo73
DRAM settings are the same as in the pre-installed Android firmware. Reliability has been verified by using the lima-memtester tool in two configurations: 1. the default "dram_clock=384MHz, dcdc3=1.250V" settings 2. artificially adjusted "dram_clock=408MHz, dcdc3=1.225V" settings (DRAM clock frequency increased by one step and dcdc3 voltage reduced by one step). No problems have been detected in either of them after several hours of running tests. Signed-off-by: Siarhei Siamashka <siarhei.siamas...@gmail.com> --- board/sunxi/Makefile | 1 + boards.cfg | 1 + 2 files changed, 2 insertions(+) diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile index 478f913..d0618dd 100644 --- a/board/sunxi/Makefile +++ b/board/sunxi/Makefile @@ -75,6 +75,7 @@ obj-$(CONFIG_MK802_A10S) += dram_mk802_a10s.o obj-$(CONFIG_MK802II) += dram_sun4i_408_1024_iow8.o obj-$(CONFIG_MK802II_A20) += dram_mk802ii_a20.o obj-$(CONFIG_MK808C_A20) += dram_sun7i_384_1024_iow16.o +obj-$(CONFIG_MSI_PRIMO73) += dram_sun7i_384_1024_iow16.o obj-$(CONFIG_OLIMEX_A13_SOM) += dram_sun5i_408_512_busw16_iow16.o obj-$(CONFIG_OLIMEX_A20_SOM) += dram_sun7i_384_1024_iow16.o obj-$(CONFIG_PCDUINO) += dram_sun4i_408_1024_iow8.o diff --git a/boards.cfg b/boards.cfg index 61f1fa2..e90776f 100644 --- a/boards.cfg +++ b/boards.cfg @@ -454,6 +454,7 @@ Active arm armv7 sunxi - sunxi Active arm armv7 sunxi - sunxi mk802ii_A20 sun7i:MK802II_A20,SPL - Active arm armv7 sunxi - sunxi mk802ii sun4i:MK802II,SPL - Active arm armv7 sunxi - sunxi mk808c_A20 sun7i:MK808C_A20,SPL - +Active arm armv7 sunxi - sunxi MSI_Primo73 sun7i:MSI_PRIMO73,SPL - Active arm armv7 sunxi - sunxi OLIMEX-A13-SOM sun5i:OLIMEX_A13_SOM,SPL,NO_AXP,STATUSLED=201,CONS_INDEX=2 - Active arm armv7 sunxi - sunxi Olimex_A20-SOM sun7i:OLIMEX_A20_SOM,SPL,SUNXI_GMAC,RGMII,STATUSLED1=245,FAST_MBUS - Active arm armv7 sunxi - sunxi pcDuino sun4i:PCDUINO,SPL,SUNXI_EMAC - -- 1.8.3.2 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.