On Wed, Nov 26, 2014 at 09:30:40AM +0100, Hans de Goede wrote:
> Hi,
>
> On 11/25/2014 07:04 PM, Maxime Ripard wrote:
> >Hi,
> >
> >On Sun, Nov 23, 2014 at 01:54:39PM +0100, Hans de Goede wrote:
> >>While working on pinctrl for the A31s, I noticed that function 4 of
> >>PA15 - PA18 was missing, add these.
> >>
> >>I also noticed that i2c3 sck / sda got assigned to PB5 & PB6, this should
> >>be PB4 & PB5, fix this as well.
> >>
> >>Signed-off-by: Hans de Goede <hdego...@redhat.com>
> >>---
> >> drivers/pinctrl/sunxi/pinctrl-sun6i-a31.c | 9 +++++++--
> >> 1 file changed, 7 insertions(+), 2 deletions(-)
> >>
> >>diff --git a/drivers/pinctrl/sunxi/pinctrl-sun6i-a31.c
> >>b/drivers/pinctrl/sunxi/pinctrl-sun6i-a31.c
> >>index a2b4b85..fb19e15 100644
> >>--- a/drivers/pinctrl/sunxi/pinctrl-sun6i-a31.c
> >>+++ b/drivers/pinctrl/sunxi/pinctrl-sun6i-a31.c
> >>@@ -134,24 +134,28 @@ static const struct sunxi_desc_pin sun6i_a31_pins[] =
> >>{
> >> SUNXI_FUNCTION(0x1, "gpio_out"),
> >> SUNXI_FUNCTION(0x2, "gmac"), /* RXD4 */
> >> SUNXI_FUNCTION(0x3, "lcd1"), /* D15 */
> >>+ SUNXI_FUNCTION(0x4, "clk_a_out"),
> >
> >It's called clk_out_a on the A20, I'd rather stick with the same
> >scheme here.
>
> Will fix.
>
> >> SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 15)), /* PA_EINT15 */
> >> SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 16),
> >> SUNXI_FUNCTION(0x0, "gpio_in"),
> >> SUNXI_FUNCTION(0x1, "gpio_out"),
> >> SUNXI_FUNCTION(0x2, "gmac"), /* RXD5 */
> >> SUNXI_FUNCTION(0x3, "lcd1"), /* D16 */
> >>+ SUNXI_FUNCTION(0x4, "dmic"), /* CLK */
> >> SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 16)), /* PA_EINT16 */
> >> SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 17),
> >> SUNXI_FUNCTION(0x0, "gpio_in"),
> >> SUNXI_FUNCTION(0x1, "gpio_out"),
> >> SUNXI_FUNCTION(0x2, "gmac"), /* RXD6 */
> >> SUNXI_FUNCTION(0x3, "lcd1"), /* D17 */
> >>+ SUNXI_FUNCTION(0x4, "dmic"), /* DIN */
> >> SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 17)), /* PA_EINT17 */
> >> SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 18),
> >> SUNXI_FUNCTION(0x0, "gpio_in"),
> >> SUNXI_FUNCTION(0x1, "gpio_out"),
> >> SUNXI_FUNCTION(0x2, "gmac"), /* RXD7 */
> >> SUNXI_FUNCTION(0x3, "lcd1"), /* D18 */
> >>+ SUNXI_FUNCTION(0x4, "clk_b_out"),
> >> SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 18)), /* PA_EINT18 */
> >> SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 19),
> >> SUNXI_FUNCTION(0x0, "gpio_in"),
> >>@@ -207,6 +211,7 @@ static const struct sunxi_desc_pin sun6i_a31_pins[] = {
> >> SUNXI_FUNCTION(0x1, "gpio_out"),
> >> SUNXI_FUNCTION(0x2, "gmac"), /* MDC */
> >> SUNXI_FUNCTION(0x3, "lcd1"), /* HSYNC */
> >>+ SUNXI_FUNCTION(0x4, "clk_c_out"),
> >> SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 26)), /* PA_EINT26 */
> >> SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 27),
> >> SUNXI_FUNCTION(0x0, "gpio_in"),
> >>@@ -242,20 +247,20 @@ static const struct sunxi_desc_pin sun6i_a31_pins[] =
> >>{
> >> SUNXI_FUNCTION(0x1, "gpio_out"),
> >> SUNXI_FUNCTION(0x2, "i2s0"), /* DO1 */
> >> SUNXI_FUNCTION(0x3, "uart3"), /* RTS */
> >>+ SUNXI_FUNCTION(0x4, "i2c3"), /* SCK */
> >> SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 4)), /* PB_EINT4 */
> >> SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 5),
> >> SUNXI_FUNCTION(0x0, "gpio_in"),
> >> SUNXI_FUNCTION(0x1, "gpio_out"),
> >> SUNXI_FUNCTION(0x2, "i2s0"), /* DO2 */
> >> SUNXI_FUNCTION(0x3, "uart3"), /* TX */
> >>- SUNXI_FUNCTION(0x4, "i2c3"), /* SCK */
> >>+ SUNXI_FUNCTION(0x4, "i2c3"), /* SDA */
> >> SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 5)), /* PB_EINT5 */
> >> SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 6),
> >> SUNXI_FUNCTION(0x0, "gpio_in"),
> >> SUNXI_FUNCTION(0x1, "gpio_out"),
> >> SUNXI_FUNCTION(0x2, "i2s0"), /* DO3 */
> >> SUNXI_FUNCTION(0x3, "uart3"), /* RX */
> >>- SUNXI_FUNCTION(0x4, "i2c3"), /* SDA */
> >
> >Where did you get that info from? The datasheet still reports that
> >information.
>
> I assume with the datasheet you mean "A31 User Manual V1.20.pdf", which
> was last updated on September 20, 2013. I did not check that one, now I
> see where the original pinctrl code from.
>
> So I've done some more digging:
>
> "A31 Datasheet - v1.00 (2012-12-24).pdf" also has twi3 sck / sda on pin
> PB5 / PB6 like the current pinctrl code.
>
> But "A31 Datasheet V1.40.pdf" which has the following in its revision log:
> "1.4 Dec 10,2013 Modify Pin Description"
>
> Moves them to PB4 / PB5 and that is where I got this from (and was the only
> place I initially looked), I think that this is an intentional change, and
> that PB4 / PB5 are the correct pins.Funny, I was looking at the A31 datasheet v1.4 from 10/12/2013 that is in the allwinner's repo, and that's where I got this from (or some earlier version of it) https://github.com/allwinner-zh/documents/blob/master/A31/A31%20datasheet%20V1.4%2020131210.pdf Something's weird here :) > I will ask Allwinner which is correct, so that we know for sure. Yep, I saw that, thanks for clearing that up. Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
signature.asc
Description: Digital signature
