Hi All, There are 3 topics which I would like to cover in this mail:
1) Switching over to upstream u-boot for the linux-sunxi project 2) How to build upstream u-boot for use with linux-sunxi sunxi-3.4 kernels 3) Adding more boards to upstream u-boot 1. Switching over to upstream u-boot for the linux-sunxi project ================================================================ Upstream u-boot has had sunxi support for a while now, and has slowly been gaining a lot of features over the linux-sunxi/u-boot-sunxi version at: https://github.com/linux-sunxi/u-boot-sunxi/ Some of the new features supported upstream are booting from usb, booting from sata (ahci) and full sun6i (A31) support including SPL support. Also upstream u-boot supports using hdmi out + an usb keyboard as u-boot console, so that one does not need to solder a serial console to things like hdmi tv-dongles. Upstream u-boot also has full sun8i (A23) support in the pipeline including SPL support. One of the things which has stopped people from switching to upstream u-boot so far is that upstream u-boot did not work with the linux-sunxi sunxi-3.4 kernels, but current upstream u-boot git master: http://git.denx.de/?p=u-boot.git;a=summary Now also has support for booting older kernels, so it is time that we stop maintaining linux-sunxi/u-boot-sunxi and start focussing all our efforts on upstream u-boot. 2. How to build upstream u-boot for use with linux-sunxi sunxi-3.4 kernels ========================================================================== Here are some example instructions on how to build upstream u-boot for the Cubietruck: git clone git://git.denx.de/u-boot.git cd u-boot make -j4 CROSS_COMPILE=arm-linux-gnu- Cubietruck_defconfig # If you want to use an upstream kernel the next steps can be skipped (*) make -j4 CROSS_COMPILE=arm-linux-gnu- menuconfig # select "ARM architecture" -> "Enable workarounds for booting old kernels" # exit & save make -j4 CROSS_COMPILE=arm-linux-gnu- spl/menuconfig # select "ARM architecture" -> "Enable workarounds for booting old kernels" # exit & save # skip to here if you're using an upstream kernel make -j4 CROSS_COMPILE=arm-linux-gnu- And now you will have a u-boot-sunxi-with-spl.bin to dd to your sdcard as usual. If you look in the upstream configs directory you will already find defconfig files for a lot of popular boards there, replace Cubietruck_defconfig with the one for your board to build u-boot for your board. See below for instructions on how to add a new board if your board is missing. *) These steps can be skipped too when using sun4i (A10) or sun5i (A10s / A13) with a current linux-sunxi/stage/sunxi-3.4 kernel. 3. Adding more boards to upstream u-boot ======================================== If you own a board which is already supported in linux-sunxi/u-boot-sunxi, and is not yet upstream, please add support for it, there are 3 simple steps to add a new board to upstream u-boot, see below. If you've any trouble with this, but are willing to be listed as a contact person for this board let me know and I'll create a patch adding the board for you to test. 1) Add the dram_foo.c file for your board from linux-sunxi/u-boot-sunxi/board/sunxi to upstream u-boot/board/sunxi and add a line for it to u-boot/board/sunxi/Makefile, see existing lines there for how this should look. 2) Create a configs/foo_defconfig file for your board, take a look at configs/Cubietruck_defconfig for an example, typically all the options found in linux-sunxi/u-boot-sunxi/boards.cfg for the board go in the CONFIG_SYS_EXTRA_OPTIONS field, except for the boardname define, which gets replaced with a line like this: +S:CONFIG_TARGET_CUBIETRUCK=y 3) Add an entry for the board to board/sunxi/MAINTAINERS, with yourself as contact person for the board. For upstream u-boot we want to have a contact person for each supported board, so that users have someone to mail who owns the actual board in case of questions. This is also why we've not simply copied all the boards from linux-sunxi/u-boot-sunxi to upstream u-boot. Regards, Hans -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.