hi, the problem is that not find the command for load script.bin with extlionux.conf this is my extlinux.conf http://sprunge.us/iRBG i have this error Ignoring unknown command: fatload Ignoring unknown command: append
2015-01-01 13:25 GMT+01:00 Hans de Goede <hdego...@redhat.com>: > Hi, > > On 31-12-14 18:16, Gerardo Di Iorio wrote: > >> hi, >> >> 2014-11-15 17:22 GMT+01:00 Iain Paton <ipat...@gmail.com>: >> >> On 15/11/14 13:18, Vishnu Patekar wrote: >>> >>> Followed the steps mentioned at >>>> >>> http://linux-sunxi.org/Mainline_Kernel_Howto >>> >>>> I've enabled the DEBUG_LL, DEBUG_SUNXI_UART0 , still While booting it on >>>> >>> Olimex >>> >>>> A20-OLinuXino-Lime2 <http://linux-sunxi.org/Olimex_A20-OLinuXino-Lime2> >>>> >>> does >>> >>>> not go beyond "starting kernel..." >>>> >>> > If you want to use mainline u-boot with sunxi kernels (rather then the > mainline kernel) you need to enable the old kernel compatibility in > u-boot's .config and spl/.config as outlined in the thread titled: > > "linux-sunxi/u-boot-sunxi is no longer supported, time to switch to > upstream u-boot" > > And specifically this bit from the mail starting that thread: > > ### > > 2. How to build upstream u-boot for use with linux-sunxi sunxi-3.4 kernels > ========================================================================== > > Here are some example instructions on how to build upstream u-boot for > the Cubietruck: > > git clone git://git.denx.de/u-boot.git > cd u-boot > make -j4 CROSS_COMPILE=arm-linux-gnu- Cubietruck_defconfig > # If you want to use an upstream kernel the next steps can be skipped (*) > make -j4 CROSS_COMPILE=arm-linux-gnu- menuconfig > # select "ARM architecture" -> "Enable workarounds for booting old > kernels" > # exit & save > make -j4 CROSS_COMPILE=arm-linux-gnu- spl/menuconfig > # select "ARM architecture" -> "Enable workarounds for booting old > kernels" > # exit & save > # skip to here if you're using an upstream kernel > make -j4 CROSS_COMPILE=arm-linux-gnu- > > And now you will have a u-boot-sunxi-with-spl.bin to dd to your sdcard as > usual. > > If you look in the upstream configs directory you will already find > defconfig files for a lot of popular boards there, replace > Cubietruck_defconfig with the one for your board to build u-boot for your > board. > > ### > > Regards, > > Hans > > > -- > You received this message because you are subscribed to the Google Groups > "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to linux-sunxi+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
