On Wed, Feb 04, 2015 at 05:41:22AM -0800, alatnet wrote: > Pictures of it can be found here: > http://www.techpowerup.com/reviews/Giada/Q11/4.html > Com port on left side does not output anything. > Port in front of sata connector might be a usb connection but unknown. > Multimeter shows that 1st port on left when viewing from front outputs > 4.76V on 20 Vdc settings. > 4th port from left pulls a 20k Ohms setting to 0. > USB 3.0 port on the right side is USB OTG connection. > Using a USB A to USB A connection and pressing the far back button on the > left side sets it to FEL Mode. > Firmware that is flashable to the device in FEL Mode: > http://download.giadatech.com.cn/driver/jt/Q11_v18_4.0.4_20130226_P008.rar > Booting off of SD Card slot works. Was able to boot an MK802 Linux > firmware without issues. > Processor is an Allwinner A10. > > Yes I am a noob with this stuff. If anyone needs any more info, i'll be > glad to provide it. > I'll see about extracting the files from /boot and the MBR and adding it to > this thread.
http://linux-sunxi.org/New_Device_howto Luc Verhaegen. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.