On Thu, May 21, 2015 at 03:00:14AM -0700, sand...@outlook.com wrote:
> On Wednesday, January 22, 2014 at 10:52:27 PM UTC+7, Luc Verhaegen wrote:
> > On Wed, Jan 22, 2014 at 10:40:49AM -0500, ferar achkar wrote:
> > > greetings Luc,
> > > I am trying to build a boot-able SD card i.e.
> > > *u-boot-sunxi-with-spl.bin* based on u-boot-sunxi source tree, for an
> > > INET-K70E board that has currently a working android, I have generated
> > > *u-boot-sunxi-with-spl.bin *based on your INet_K70HC board cfg, but it
> > > did not boot, can you please advise on how you populated struct
> > > dram_para in 'board/sunxi/dram_inet_k70hc.c' file:
> > >
> > > static struct dram_para dram_para = { /// for INet_K70HC board as
> > > authored by Luc Verhaegen <l...@skynet.be> 2014-01-02 06:37:24
> > > .clock = 384,
> > > .type = 3,
> > > .rank_num = 1,
> > > .density = 4096,
> > > .io_width = 16,
> > > .bus_width = 32,
> > > .cas = 9,
> > > .zq = 0x12331a7f,
> > > .odt_en = 0,
> > > .size = 1024,
> > > .tpr0 = 0x42d899b7,
> > > .tpr1 = 0xa090,
> > > .tpr2 = 0x22a00,
> > > .tpr3 = 0,
> > > .tpr4 = 1,
> > > .tpr5 = 0,
> > > .emr1 = 0x4,
> > > .emr2 = 0x10,
> > > .emr3 = 0,
> > > };
> > >
> > > since the i have used the same script.bin currently on the nand flash, i
> > > am not sure, but i think the dram_para values for INet_K70HC are not
> > > correct for the INET-K70E board (below is a snapshot of the board).
> > > much appreciated,
> > > ferar
> >
> > Do not send emails to people directly, especially when they are general
> > sunxi questions. Use the mailing list.
> >
> > "it did not boot" could be a great many things. Attach serial and find
> > out.
> >
> > The image attached shows only a tiny part of the board. So it usually
> > would not be very useful to begin with.
> >
> > But... Even with this small part of the board visible, it is clear that
> > this is a completely different board from the k70hc. Please work through
> > the http://linux-sunxi.org/New_Device_howto meticulously before you do
> > anything else.
> >
> > Luc Verhaegen.
>
> here: http://thuvien.bkc.vn/Tablet/Firmware/2GOOD/2Good.VenusPro.rar
Thanks. I will pull that in on the weekend and extract the necessary
info then.
Luc Verhaegen.
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
