On Tue, Jun 02, 2015 at 08:32:59PM +0200, Hans de Goede wrote: > Hi, > > On 06/02/2015 05:58 PM, Maxime Ripard wrote: > >On Mon, Jun 01, 2015 at 05:02:59PM +0200, Hans de Goede wrote: > >>The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been > >>using > >>the same dts for both models. Unfortunately this does not work for the otg > >>controller, on the M9 this is routed to a micro-usb connector on the > >>outside, > >>while as on the A1000G-quad it is connected to an usb to sata bridge > >>(which is not populated on the M9 pcb). > >> > >>This commit adds a new dts for the Mele-A1000G-quad to allow using > >>different otg controller settings on the 2 boards. > >> > >>Signed-off-by: Hans de Goede <hdego...@redhat.com> > >>--- > >> arch/arm/boot/dts/Makefile | 1 + > >> arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} | 4 ++-- > > > >Didn't we say that we were trying to set the vendor name in the DTs > >now, at least for the new ones? > > I think we said that Paul would write a proposal to standardize > naming for future boards, but that never materialized. > > >I can fix this and apply it if it's ok for you. > > I'm fine with throwing -mele- in there, or not, what ever you > prefer.
Ok, applied and fixed the name. This is probably going to be the last patch pulled for 4.2, unless something important shows up in the next few days. Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
signature.asc
Description: Digital signature