Hello, On 31 July 2015 at 14:53, Hans de Goede <hdego...@redhat.com> wrote: > Enable the otg/drc usb controller on the A10s OLinuxIno Micro. > > Note the A10s OlinuxIno Micro always has some voltage on its otg power > pin, even if the usb-vbus0-regulator is disabled, the leaked voltage is > enough to make vbus-det always report 1, so we do not use vbus-det on > this board.
What board revision do you have? Also does this not go down when you connect a device which draws power? It is useless for self-powered device detection, though :-s Still the Olinuxino is not battery powered normally so powering the bus at all times is probably ok. Thanks Michal -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
