Hi everyone, This is my fifth attempt at adding support for Allwinner's Reduced Serial Bus (RSB), which is used to communicate with PMICs and other peripherals on their newer SoCs, such as the A23/A33/A80.
RSB is a simplified two wire interface using push-pull outputs, supporting multiple slaves, address and data parity checks, and clock speeds up to 20 MHz. The bus only supports simple register read/writes, with possible register sizes of 8/16/32 bits. Access sizes not matching the slave device register sizes result in NACKs or errors. 32 bit registers in devices have yet to be seen. v4 and later adds a platform driver for the RSB controller under drivers/soc/sunxi, which adds a custom driver type and bus type for slave drivers to use. Custom regmap support is also merged into the controller driver. Currently the driver only exports 2 symbols: sunxi_rsb_driver_register() & __devm_regmap_init_sunxi_rsb(). Changes since v4: - Add newlines to printk calls missing them. - Removed bus type checks (dev->bus != &sunxi_rsb_bus) - Use different lockdep class for each regmap init call, as in 3cfe7a74d42b ("regmap: Use different lockdep class for each regmap init call") - Move enabling RSB controller from ippo-q8h-v5 dts to sun8i-q8-common dts. Patch 1 adds the DT bindings for Allwinner RSB controller. Patch 2 adds the driver itself. Patch 3 adds the RSB nodes for A23/A33 dtsi. Patch 4 enables the RSB controller on A23/A33 Q8 format tablets. Patch 5 enables the RSB controller on Sinlinx SinA33. Still to come are axp20x driver support for the RSB based AXP223. The complete series can be found at: https://github.com/wens/linux/tree/sunxi-rsb-v5 This is now sunxi specific, so if everything works out, it should all go through Maxime's tree? Regards, ChenYu Chen-Yu Tsai (5): soc: sunxi: Add Allwinner Reduced Serial Bus (RSB) controller bindings soc: sunxi: Add driver for Allwinner Reduced Serial Bus ARM: dts: sun8i: Add Reduced Serial Bus controller device node to A23/A33 dtsi ARM: dts: sun8i: q8-common: Enable RSB controller for A23/A33 Q8 tablets ARM: dts: sun8i: sinlinx-sina33: Enable Reduced Serial Bus controller .../devicetree/bindings/soc/sunxi/rsb.txt | 47 ++ arch/arm/boot/dts/sun8i-a23-a33.dtsi | 21 + arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 4 + arch/arm/boot/dts/sun8i-q8-common.dtsi | 4 + drivers/soc/sunxi/Kconfig | 10 + drivers/soc/sunxi/Makefile | 1 + drivers/soc/sunxi/sunxi_rsb.c | 783 +++++++++++++++++++++ include/linux/soc/sunxi/sunxi_rsb.h | 105 +++ 8 files changed, 975 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/sunxi/rsb.txt create mode 100644 drivers/soc/sunxi/sunxi_rsb.c create mode 100644 include/linux/soc/sunxi/sunxi_rsb.h -- 2.5.3 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.