On Thu, 15 Oct 2015 19:17:23 +0200
Boris Brezillon <boris.brezil...@free-electrons.com> wrote:

> Add support for the randomizer engine available in Allwinner's NFC IP.
> 
> Randomization is useful to support modern NAND chips which are sensible to
> repeated patterns. On such NANDs you might experience an unexpectedly high
> number of bitflips when you repeat the same pattern all over a given NAND
> block.
> Randomizing input data mitigate this problem by avoiding such repeated
> patterns.
> 
> Signed-off-by: Boris Brezillon <boris.brezil...@free-electrons.com>
> ---
>  drivers/mtd/nand/sunxi_nand.c | 274 
> ++++++++++++++++++++++++++++++++++++++----
>  1 file changed, 250 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
> index ef46ac6..5508ce8 100644
> --- a/drivers/mtd/nand/sunxi_nand.c
> +++ b/drivers/mtd/nand/sunxi_nand.c
> @@ -60,6 +60,7 @@
>  #define NFC_REG_ECC_ERR_CNT(x)       ((0x0040 + (x)) & ~0x3)
>  #define NFC_REG_USER_DATA(x) (0x0050 + ((x) * 4))
>  #define NFC_REG_SPARE_AREA   0x00A0
> +#define NFC_REG_PAT_ID               0x00A4
>  #define NFC_RAM0_BASE                0x0400
>  #define NFC_RAM1_BASE                0x0800
>  
> @@ -225,6 +226,7 @@ struct sunxi_nand_hw_ecc {
>   * @node:            used to store NAND chips into a list
>   * @nand:            base NAND chip structure
>   * @mtd:             base MTD structure
> + * @randomize:               randomize data
>   * @clk_rate:                clk_rate required for this NAND chip
>   * @timing_cfg               TIMING_CFG register value for this NAND chip
>   * @selected:                current active CS
> @@ -235,6 +237,7 @@ struct sunxi_nand_chip {
>       struct list_head node;
>       struct nand_chip nand;
>       struct mtd_info mtd;
> +     bool randomize;

This variable is a leftover from a previous version, I'll drop it for
the next version.

-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to