Hi, On Mon, Oct 26, 2015 at 04:02:18PM +0800, Chen-Yu Tsai wrote: > Hi, > > On Mon, Oct 26, 2015 at 4:49 AM, Lawrence Yu <[email protected]> wrote: > > Enable the axp221 PMIC chip in the dts file. > > > > Allows board to power off correctly from the poweroff command > > > > This board requires dc1sw to be enabled in order to provide a power source > > for the 5V DCDC converter that powers USB2. > > > > This board uses dldo1 for 3.3V wifi power > > > > This board requires dldo3 to be enabled at 2.8V in order to provide voltage > > to the pullup resistors for the i2c0 bus. > > > > --- > > Changes since v3 > > > > - Changed reg_dc1sw to be a node reference > > - Moved regulator nodes to correct alphabetical position before uart0 > > > > Changes since v2 > > > > - Rename regulator vcc-dc1sw to vcc-lcd-usb2 > > - Rename regulator vcc-csi to vddio-csi > > - Remove regulator-always-on from dldo3 > > - Remove comment about LCD backlight and USB2 from reg_dc1sw > > - Remove comment about dc1sw providing power to LCD backlight in patch > > description > > > > Changes since v1 > > > > - Use axp22x.dtsi to standardize the register names > > - Change wifi power regulator to dldo1 instead of incorrect aldo1 > > - Remove unnecessary gpio pin PH27 for wifi power, since this board uses > > the axp221 chip to control power to the wifi chip. > > > > Signed-off-by: Lawrence Yu <[email protected]> > > Normally one puts this at the end of the commit message, then "---", > then changelogs and any additional messages for the maintainer. :) > > Overall this version looks good. > > Acked-by: Chen-Yu Tsai <[email protected]>
I've fixed the SoB, and applied the patch. It's queued for 4.5, and I won't push the branch before 4.4-rc1 is released. > Please send additional patches for reordering stuff, simplefb regulators, > and possibly cpu regulator (so you get full cpufreq support). > > P.S. Your patch is not showing up on LAKML patchwork. Not subscribed? Yeah, for some reason it wasn't showing up in my INBOX either (but your reply did). Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
signature.asc
Description: Digital signature
