On Sun, Nov 1, 2015 at 9:17 PM, Jens Kuske <jensku...@gmail.com> wrote: > On 30/10/15 09:08, Chen-Yu Tsai wrote: >> Hi, >> >> On Wed, Oct 28, 2015 at 12:50 AM, Jens Kuske <jensku...@gmail.com> wrote: >>> The H3 uses the same pin controller as previous SoC's from Allwinner. >>> Add support for the pins controlled by the main PIO controller. >>> >>> Signed-off-by: Jens Kuske <jensku...@gmail.com> >>> Acked-by: Maxime Ripard <maxime.rip...@free-electrons.com> >>> --- >>> .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 + >>> drivers/pinctrl/sunxi/Kconfig | 4 + >>> drivers/pinctrl/sunxi/Makefile | 1 + >>> drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c | 516 >>> +++++++++++++++++++++ >>> 4 files changed, 522 insertions(+) >>> create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c >>> >>> diff --git >>> a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt >>> b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt >>> index b321b26..e6ba602 100644 >>> --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt >>> +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt >>> @@ -18,6 +18,7 @@ Required properties: >>> "allwinner,sun8i-a23-r-pinctrl" >>> "allwinner,sun8i-a33-pinctrl" >>> "allwinner,sun8i-a83t-pinctrl" >>> + "allwinner,sun8i-h3-pinctrl" >>> >>> - reg: Should contain the register physical address and length for the >>> pin controller. >>> diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig >>> index e68fd95..89ab7f5 100644 >>> --- a/drivers/pinctrl/sunxi/Kconfig >>> +++ b/drivers/pinctrl/sunxi/Kconfig >>> @@ -51,6 +51,10 @@ config PINCTRL_SUN8I_A23_R >>> depends on RESET_CONTROLLER >>> select PINCTRL_SUNXI_COMMON >>> >>> +config PINCTRL_SUN8I_H3 >>> + def_bool MACH_SUN8I >>> + select PINCTRL_SUNXI_COMMON >>> + >>> config PINCTRL_SUN9I_A80 >>> def_bool MACH_SUN9I >>> select PINCTRL_SUNXI_COMMON >>> diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile >>> index e080290..6bd818e 100644 >>> --- a/drivers/pinctrl/sunxi/Makefile >>> +++ b/drivers/pinctrl/sunxi/Makefile >>> @@ -13,4 +13,5 @@ obj-$(CONFIG_PINCTRL_SUN8I_A23) += >>> pinctrl-sun8i-a23.o >>> obj-$(CONFIG_PINCTRL_SUN8I_A23_R) += pinctrl-sun8i-a23-r.o >>> obj-$(CONFIG_PINCTRL_SUN8I_A33) += pinctrl-sun8i-a33.o >>> obj-$(CONFIG_PINCTRL_SUN8I_A83T) += pinctrl-sun8i-a83t.o >>> +obj-$(CONFIG_PINCTRL_SUN8I_H3) += pinctrl-sun8i-h3.o >>> obj-$(CONFIG_PINCTRL_SUN9I_A80) += pinctrl-sun9i-a80.o >>> diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c >>> b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c >>> new file mode 100644 >>> index 0000000..98d465d >>> --- /dev/null >>> +++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c >>> @@ -0,0 +1,516 @@ >>> +/* >>> + * Allwinner H3 SoCs pinctrl driver. >>> + * >>> + * Copyright (C) 2015 Jens Kuske <jensku...@gmail.com> >>> + * >>> + * Based on pinctrl-sun8i-a23.c, which is: >>> + * Copyright (C) 2014 Chen-Yu Tsai <w...@csie.org> >>> + * Copyright (C) 2014 Maxime Ripard <maxime.rip...@free-electrons.com> >>> + * >>> + * This file is licensed under the terms of the GNU General Public >>> + * License version 2. This program is licensed "as is" without any >>> + * warranty of any kind, whether express or implied. >>> + */ >>> + >>> +#include <linux/module.h> >>> +#include <linux/platform_device.h> >>> +#include <linux/of.h> >>> +#include <linux/of_device.h> >>> +#include <linux/pinctrl/pinctrl.h> >>> + >>> +#include "pinctrl-sunxi.h" >>> + >>> +static const struct sunxi_desc_pin sun8i_h3_pins[] = { >> >> <snip> >> >>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 0), >>> + SUNXI_FUNCTION(0x0, "gpio_in"), >>> + SUNXI_FUNCTION(0x1, "gpio_out"), >>> + SUNXI_FUNCTION(0x2, "emac")), /* RXD3 */ >>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 1), >>> + SUNXI_FUNCTION(0x0, "gpio_in"), >>> + SUNXI_FUNCTION(0x1, "gpio_out"), >>> + SUNXI_FUNCTION(0x2, "emac")), /* RXD2 */ >>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 2), >>> + SUNXI_FUNCTION(0x0, "gpio_in"), >>> + SUNXI_FUNCTION(0x1, "gpio_out"), >>> + SUNXI_FUNCTION(0x2, "emac")), /* RXD1 */ >>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 3), >>> + SUNXI_FUNCTION(0x0, "gpio_in"), >>> + SUNXI_FUNCTION(0x1, "gpio_out"), >>> + SUNXI_FUNCTION(0x2, "emac")), /* RXD0 */ >>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 4), >>> + SUNXI_FUNCTION(0x0, "gpio_in"), >>> + SUNXI_FUNCTION(0x1, "gpio_out"), >>> + SUNXI_FUNCTION(0x2, "emac")), /* RXCK */ >>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 5), >>> + SUNXI_FUNCTION(0x0, "gpio_in"), >>> + SUNXI_FUNCTION(0x1, "gpio_out"), >>> + SUNXI_FUNCTION(0x2, "emac")), /* RXCTL/RCDV */ >> >> RXDV? >> >>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 6), >>> + SUNXI_FUNCTION(0x0, "gpio_in"), >>> + SUNXI_FUNCTION(0x1, "gpio_out"), >>> + SUNXI_FUNCTION(0x2, "emac")), /* RXERR */ >>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 7), >>> + SUNXI_FUNCTION(0x0, "gpio_in"), >>> + SUNXI_FUNCTION(0x1, "gpio_out"), >>> + SUNXI_FUNCTION(0x2, "emac")), /* TXD3 */ >>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 8), >>> + SUNXI_FUNCTION(0x0, "gpio_in"), >>> + SUNXI_FUNCTION(0x1, "gpio_out"), >>> + SUNXI_FUNCTION(0x2, "emac")), /* TXD2L */ >> >> Trailing "L" there. >> >>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 9), >>> + SUNXI_FUNCTION(0x0, "gpio_in"), >>> + SUNXI_FUNCTION(0x1, "gpio_out"), >>> + SUNXI_FUNCTION(0x2, "emac")), /* TXD1 */ >> >> <snip> >> >>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 0), >>> + SUNXI_FUNCTION(0x0, "gpio_in"), >>> + SUNXI_FUNCTION(0x1, "gpio_out"), >>> + SUNXI_FUNCTION(0x2, "mmc1"), /* CLK */ >>> + SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 0)), /* PG_EINT0 */ >> >> Datasheet say EINT is function 0x6. Same for all the other pins in group G. > > Thanks. I had checked the whole list at least three times, but one > always overlooks something it seems.
As someone who's done this a few times, I can say that it all starts to look the same after a few rounds. :) ChenYu -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.