On Fri, Dec 11, 2015 at 4:51 PM, <goo...@engidea.com> wrote: > The most up to date documentation is the following > https://github.com/allwinner-zh > > > documents/A20/A20_User_Manual_v1.4_20150510.pdf > > Page 289 has no mention of the fact that to actually have clk_out_a you need > to set the port to pullup mode
Well a lot of the manual is just register value dumps. Not much explaining how things are supposed to work. Maybe if you had a contract with them things might be different, but I wouldn't know. Also if you think something is wrong or missing, you can raise an issue with them directly: https://github.com/allwinner-zh/documents/issues > Also, (unrelated but puzzling question) from pinctrl-sun71-a20.c > > SUNXI_FUNCTION(0x4, "clk_out_a"), /* CLK_OUT_A */ > SUNXI_FUNCTION_IRQ(0x5, 24)), /* EINT24 */ > > Should MUX code for SUNXI_FUNCTION_IRQ be 0x6 as from manual page ? The driver is probably wrong. Feel free to send a patch for it. :) Regards ChenYu > >> >> What documentation are you referring to? >> >> ChenYu > > -- > You received this message because you are subscribed to the Google Groups > "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to linux-sunxi+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
