Secure Memory Touch Arbiter is the same thing as the TrustZone
Protection Controller found on A31/A31s.
Access to many peripherals on the H3 can be controlled by the SMTA,
and the settings default to secure access only.
This patch supports the new settings, and sets them to allow non-secure
access.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
arch/arm/cpu/armv7/sunxi/Makefile | 1 +
arch/arm/cpu/armv7/sunxi/tzpc.c | 11 ++++++++++-
arch/arm/include/asm/arch-sunxi/tzpc.h | 13 ++++++++++++-
3 files changed, 23 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile
b/arch/arm/cpu/armv7/sunxi/Makefile
index dfb0a3e..7a6a3cc 100644
--- a/arch/arm/cpu/armv7/sunxi/Makefile
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o
endif
obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o
obj-$(CONFIG_MACH_SUN6I) += tzpc.o
+obj-$(CONFIG_MACH_SUN8I) += tzpc.o
obj-$(CONFIG_AXP152_POWER) += pmic_bus.o
obj-$(CONFIG_AXP209_POWER) += pmic_bus.o
diff --git a/arch/arm/cpu/armv7/sunxi/tzpc.c b/arch/arm/cpu/armv7/sunxi/tzpc.c
index 5c9c69b..6c8a0fd 100644
--- a/arch/arm/cpu/armv7/sunxi/tzpc.c
+++ b/arch/arm/cpu/armv7/sunxi/tzpc.c
@@ -13,6 +13,15 @@ void tzpc_init(void)
{
struct sunxi_tzpc *tzpc = (struct sunxi_tzpc *)SUNXI_TZPC_BASE;
+#ifdef CONFIG_MACH_SUN6I
/* Enable non-secure access to the RTC */
- writel(SUNXI_TZPC_DECPORT0_RTC, &tzpc->decport0_set);
+ writel(SUN6I_TZPC_DECPORT0_RTC, &tzpc->decport0_set);
+#endif
+
+#ifdef CONFIG_MACH_SUN8I_H3
+ /* Enable non-secure access to all peripherals */
+ writel(SUN8I_H3_TZPC_DECPORT0_ALL, &tzpc->decport0_set);
+ writel(SUN8I_H3_TZPC_DECPORT1_ALL, &tzpc->decport1_set);
+ writel(SUN8I_H3_TZPC_DECPORT2_ALL, &tzpc->decport2_set);
+#endif
}
diff --git a/arch/arm/include/asm/arch-sunxi/tzpc.h
b/arch/arm/include/asm/arch-sunxi/tzpc.h
index ba4d43b..95c55cd 100644
--- a/arch/arm/include/asm/arch-sunxi/tzpc.h
+++ b/arch/arm/include/asm/arch-sunxi/tzpc.h
@@ -13,10 +13,21 @@ struct sunxi_tzpc {
u32 decport0_status; /* 0x04 Status of decode protection port 0 */
u32 decport0_set; /* 0x08 Set decode protection port 0 */
u32 decport0_clear; /* 0x0c Clear decode protection port 0 */
+ /* For A80 and later SoCs */
+ u32 decport1_status; /* 0x10 Status of decode protection port 1 */
+ u32 decport1_set; /* 0x14 Set decode protection port 1 */
+ u32 decport1_clear; /* 0x18 Clear decode protection port 1 */
+ u32 decport2_status; /* 0x1c Status of decode protection port 2 */
+ u32 decport2_set; /* 0x20 Set decode protection port 2 */
+ u32 decport2_clear; /* 0x24 Clear decode protection port 2 */
};
#endif
-#define SUNXI_TZPC_DECPORT0_RTC (1 << 1)
+#define SUN6I_TZPC_DECPORT0_RTC (1 << 1)
+
+#define SUN8I_H3_TZPC_DECPORT0_ALL 0xbe
+#define SUN8I_H3_TZPC_DECPORT1_ALL 0xff
+#define SUN8I_H3_TZPC_DECPORT2_ALL 0x7f
void tzpc_init(void);
--
2.6.4
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
