No, screen is still black, I'll try your suggestion, with MSB.
But what about rgb66 dithering, which is set my settings? A20 provides this setting, what does it exacty and works it at all? "*lcd_frm*: 0 to disable dither; 1 to enable rgb666 dither; 2 to enable rgb656 dither" from http://linux-sunxi.org/Fex_Guide#disp_init_configuration PS: Do not know where is my previous message gone, therefore the same here. Am Freitag, 19. Februar 2016 11:47:32 UTC+1 schrieb Rafael Kähm: > > Hey folks i'm trying to get SHARP LQ092B5DW01 running on Banana[s] Pi/Pro > but can not get it working. > > Could somebody explain how to get LQ092B5DW01 working on A20 if it is > possible or explain why not possible if its not. > > Also i tried following settings for fex file without success. > > ``` > screen0_output_type = 1 > lcd_frm = 1 > fb0_format = 9 > lcd_x = 960 > lcd_y = 160 > lcd_dclk_freq = 18 > lcd_if = 0 > lcd_hv_if = 0 > lcd_hbp = 157 > lcd_vbp = 39 > lcd_vt = 1050 > ``` > > Here is small spec document from display > https://www.pollin.de/shop/downloads/D120858D.PDF , which costs 5€ only > ;) > > And here is small schema, how i connected Banana with Screen > https://www.mikrocontroller.net/attachment/272366/LQ092B5DW01_am_BananaPi.jpg > > PS: for Backlighting I used external ~19V Pewer supply. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
