Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.

Signed-off-by: Boris Brezillon <boris.brezil...@free-electrons.com>
---
 drivers/mtd/nand/sm_common.c | 93 ++++++++++++++++++++++++++++++++++++--------
 1 file changed, 77 insertions(+), 16 deletions(-)

diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
index c514740..5939dff 100644
--- a/drivers/mtd/nand/sm_common.c
+++ b/drivers/mtd/nand/sm_common.c
@@ -12,14 +12,47 @@
 #include <linux/sizes.h>
 #include "sm_common.h"
 
-static struct nand_ecclayout nand_oob_sm = {
-       .eccbytes = 6,
-       .eccpos = {8, 9, 10, 13, 14, 15},
-       .oobfree = {
-               {.offset = 0 , .length = 4}, /* reserved */
-               {.offset = 6 , .length = 2}, /* LBA1 */
-               {.offset = 11, .length = 2}  /* LBA2 */
+static int oob_sm_ooblayout_ecc(struct mtd_info *mtd, int section,
+                               struct mtd_oob_region *oobregion)
+{
+       if (section > 1)
+               return -ERANGE;
+
+       oobregion->length = 3;
+       oobregion->offset = ((section + 1) * 8) - 3;
+
+       return 0;
+}
+
+static int oob_sm_ooblayout_free(struct mtd_info *mtd, int section,
+                                struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               /* reserved */
+               oobregion->offset = 0;
+               oobregion->length = 4;
+               break;
+       case 1:
+               /* LBA1 */
+               oobregion->offset = 6;
+               oobregion->length = 2;
+               break;
+       case 2:
+               /* LBA2 */
+               oobregion->offset = 11;
+               oobregion->length = 2;
+               break;
+       default:
+               return -ERANGE;
        }
+
+       return 0;
+}
+
+static const struct mtd_ooblayout_ops oob_sm_ops = {
+       .ecc = oob_sm_ooblayout_ecc,
+       .free = oob_sm_ooblayout_free,
 };
 
 /* NOTE: This layout is is not compatabable with SmartMedia, */
@@ -28,15 +61,43 @@ static struct nand_ecclayout nand_oob_sm = {
 /* If you use smftl, it will bypass this and work correctly */
 /* If you not, then you break SmartMedia compliance anyway */
 
-static struct nand_ecclayout nand_oob_sm_small = {
-       .eccbytes = 3,
-       .eccpos = {0, 1, 2},
-       .oobfree = {
-               {.offset = 3 , .length = 2}, /* reserved */
-               {.offset = 6 , .length = 2}, /* LBA1 */
+static int oob_sm_small_ooblayout_ecc(struct mtd_info *mtd, int section,
+                                     struct mtd_oob_region *oobregion)
+{
+       if (section)
+               return -ERANGE;
+
+       oobregion->length = 3;
+       oobregion->offset = 0;
+
+       return 0;
+}
+
+static int oob_sm_small_ooblayout_free(struct mtd_info *mtd, int section,
+                                      struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               /* reserved */
+               oobregion->offset = 3;
+               oobregion->length = 2;
+               break;
+       case 1:
+               /* LBA1 */
+               oobregion->offset = 6;
+               oobregion->length = 2;
+               break;
+       default:
+               return -ERANGE;
        }
-};
 
+       return 0;
+}
+
+static const struct mtd_ooblayout_ops oob_sm_small_ops = {
+       .ecc = oob_sm_small_ooblayout_ecc,
+       .free = oob_sm_small_ooblayout_free,
+};
 
 static int sm_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
@@ -121,9 +182,9 @@ int sm_register_device(struct mtd_info *mtd, int smartmedia)
 
        /* ECC layout */
        if (mtd->writesize == SM_SECTOR_SIZE)
-               chip->ecc.layout = &nand_oob_sm;
+               mtd_set_ooblayout(mtd, &oob_sm_ops);
        else if (mtd->writesize == SM_SMALL_PAGE)
-               chip->ecc.layout = &nand_oob_sm_small;
+               mtd_set_ooblayout(mtd, &oob_sm_small_ops);
        else
                return -ENODEV;
 
-- 
2.1.4

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to