Being able to read subpages can greatly improve read performances if the MTD user is only interested in a small section of a NAND page. This is particularly true with large pages (>= 8k).
Signed-off-by: Boris Brezillon <boris.brezil...@free-electrons.com> --- drivers/mtd/nand/sunxi_nand.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c index 8977a5f..df73e55 100644 --- a/drivers/mtd/nand/sunxi_nand.c +++ b/drivers/mtd/nand/sunxi_nand.c @@ -974,6 +974,39 @@ static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd, return max_bitflips; } +static int sunxi_nfc_hw_ecc_read_subpage(struct mtd_info *mtd, + struct nand_chip *chip, + u32 data_offs, u32 readlen, + u8 *bufpoi, int page) +{ + struct nand_ecc_ctrl *ecc = &chip->ecc; + int ret, i, cur_off = 0; + unsigned int max_bitflips = 0; + + sunxi_nfc_hw_ecc_enable(mtd); + + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + for (i = data_offs / ecc->size; + i < DIV_ROUND_UP(data_offs + readlen, ecc->size); i++) { + int data_off = i * ecc->size; + int oob_off = i * (ecc->bytes + 4); + u8 *data = bufpoi + data_off; + u8 *oob = chip->oob_poi + oob_off; + + ret = sunxi_nfc_hw_ecc_read_chunk(mtd, data, data_off, + oob, + oob_off + mtd->writesize, + &cur_off, &max_bitflips, + !i, page); + if (ret < 0) + return ret; + } + + sunxi_nfc_hw_ecc_disable(mtd); + + return max_bitflips; +} + static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required, @@ -1384,6 +1417,7 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct mtd_info *mtd, ecc->write_page = sunxi_nfc_hw_ecc_write_page; ecc->read_oob_raw = nand_read_oob_std; ecc->write_oob_raw = nand_write_oob_std; + ecc->read_subpage = sunxi_nfc_hw_ecc_read_subpage; layout = ecc->layout; nsectors = mtd->writesize / ecc->size; @@ -1630,6 +1664,8 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc, if (nand->options & NAND_NEED_SCRAMBLING) nand->options |= NAND_NO_SUBPAGE_WRITE; + nand->options |= NAND_SUBPAGE_READ; + ret = sunxi_nand_chip_init_timings(chip, np); if (ret) { dev_err(dev, "could not configure chip timings: %d\n", ret); -- 2.1.4 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.