The mtd_ooblayout_xxx() helper functions have been added to avoid direct accesses to the ecclayout field, and thus ease for future reworks. Use these helpers in all places where the oobfree[] and eccpos[] arrays where directly accessed.
Signed-off-by: Boris Brezillon <boris.brezil...@free-electrons.com> --- drivers/mtd/nand/omap2.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 0749ca1..4ebf16b 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1495,9 +1495,8 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data, static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required, int page) { - int i; + int ret; uint8_t *ecc_calc = chip->buffers->ecccalc; - uint32_t *eccpos = chip->ecc.layout->eccpos; /* Enable GPMC ecc engine */ chip->ecc.hwctl(mtd, NAND_ECC_WRITE); @@ -1508,8 +1507,10 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip, /* Update ecc vector from GPMC result registers */ chip->ecc.calculate(mtd, buf, &ecc_calc[0]); - for (i = 0; i < chip->ecc.total; i++) - chip->oob_poi[eccpos[i]] = ecc_calc[i]; + ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, + chip->ecc.total); + if (ret) + return ret; /* Write ecc vector to OOB area */ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); @@ -1536,10 +1537,7 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, { uint8_t *ecc_calc = chip->buffers->ecccalc; uint8_t *ecc_code = chip->buffers->ecccode; - uint32_t *eccpos = chip->ecc.layout->eccpos; - uint8_t *oob = &chip->oob_poi[eccpos[0]]; - uint32_t oob_pos = mtd->writesize + chip->ecc.layout->eccpos[0]; - int stat; + int stat, ret; unsigned int max_bitflips = 0; /* Enable GPMC ecc engine */ @@ -1549,13 +1547,16 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, chip->read_buf(mtd, buf, mtd->writesize); /* Read oob bytes */ - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1); - chip->read_buf(mtd, oob, chip->ecc.total); + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); /* Calculate ecc bytes */ chip->ecc.calculate(mtd, buf, ecc_calc); - memcpy(ecc_code, &chip->oob_poi[eccpos[0]], chip->ecc.total); + ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0, + chip->ecc.total); + if (ret) + return ret; stat = chip->ecc.correct(mtd, buf, ecc_code, ecc_calc); -- 2.5.0 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.