Hi,
On 29-03-16 18:26, Chen-Yu Tsai wrote:
The A83T has 3 USB PHYs: 1 for USB OTG, 1 for standard USB 1.1/2.0 host,
1 for USB HSIC.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
Note, I've made some minor changes to this one to reduce the amount of
#ifdef-s it introduces.
Regards,
Hans
---
arch/arm/cpu/armv7/sunxi/usb_phy.c | 48 ++++++++++++++++++++++++++++++++++++++
include/configs/sun8i.h | 2 ++
2 files changed, 50 insertions(+)
diff --git a/arch/arm/cpu/armv7/sunxi/usb_phy.c
b/arch/arm/cpu/armv7/sunxi/usb_phy.c
index 0749fbd..4ac532a 100644
--- a/arch/arm/cpu/armv7/sunxi/usb_phy.c
+++ b/arch/arm/cpu/armv7/sunxi/usb_phy.c
@@ -34,6 +34,16 @@
#define REG_PHY_UNK_H3 0x420
#define REG_PMU_UNK_H3 0x810
+/* A83T specific control bits for PHY0 */
+#define SUNXI_PHY_CTL_VBUSVLDEXT BIT(5)
+#define SUNXI_PHY_CTL_SIDDQ BIT(3)
+
+/* A83T HSIC specific bits */
+#define SUNXI_EHCI_HS_FORCE BIT(20)
+#define SUNXI_EHCI_CONNECT_DET BIT(17)
+#define SUNXI_EHCI_CONNECT_INT BIT(16)
+#define SUNXI_EHCI_HSIC BIT(1)
+
static struct sunxi_usb_phy {
int usb_rst_mask;
int gpio_vbus;
@@ -55,6 +65,14 @@ static struct sunxi_usb_phy {
.base = SUNXI_USB1_BASE,
},
#if CONFIG_SUNXI_USB_PHYS >= 3
+#ifdef CONFIG_MACH_SUN8I_A83T
+ {
+ .usb_rst_mask = CCM_USB_CTRL_HSIC_RST | CCM_USB_CTRL_HSIC_CLK |
+ CCM_USB_CTRL_12M_CLK,
+ .id = 2,
+ .base = SUNXI_USB2_BASE,
+ }
+#else
{
.usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
.id = 2,
@@ -68,6 +86,7 @@ static struct sunxi_usb_phy {
.base = SUNXI_USB3_BASE,
}
#endif
+#endif
};
static int get_vbus_gpio(int index)
@@ -97,6 +116,7 @@ static int get_id_detect_gpio(int index)
return -EINVAL;
}
+#ifndef CONFIG_MACH_SUN8I_A83T
static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
int data, int len)
{
@@ -161,6 +181,7 @@ static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
return;
}
#endif
+#endif
static void sunxi_usb_phy_passby(struct sunxi_usb_phy *phy, int enable)
{
@@ -174,6 +195,13 @@ static void sunxi_usb_phy_passby(struct sunxi_usb_phy
*phy, int enable)
SUNXI_EHCI_AHB_INCRX_ALIGN_EN |
SUNXI_EHCI_ULPI_BYPASS_EN;
+#ifdef CONFIG_MACH_SUN8I_A83T
+ if (phy->id == 2)
+ bits |= SUNXI_EHCI_HS_FORCE |
+ SUNXI_EHCI_CONNECT_INT |
+ SUNXI_EHCI_HSIC;
+#endif
+
if (enable)
setbits_le32(addr, bits);
else
@@ -184,9 +212,11 @@ static void sunxi_usb_phy_passby(struct sunxi_usb_phy
*phy, int enable)
void sunxi_usb_phy_enable_squelch_detect(int index, int enable)
{
+#ifndef CONFIG_MACH_SUN8I_A83T
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
usb_phy_write(phy, 0x3c, enable ? 0 : 2, 2);
+#endif
}
void sunxi_usb_phy_init(int index)
@@ -200,10 +230,21 @@ void sunxi_usb_phy_init(int index)
setbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
+#ifndef CONFIG_MACH_SUN8I_A83T
sunxi_usb_phy_config(phy);
+#endif
if (phy->id != 0)
sunxi_usb_phy_passby(phy, SUNXI_USB_PASSBY_EN);
+
+#ifdef CONFIG_MACH_SUN8I_A83T
+ if (phy->id == 0) {
+ setbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
+ SUNXI_PHY_CTL_VBUSVLDEXT);
+ clrbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
+ SUNXI_PHY_CTL_SIDDQ);
+ }
+#endif
}
void sunxi_usb_phy_exit(int index)
@@ -218,6 +259,13 @@ void sunxi_usb_phy_exit(int index)
if (phy->id != 0)
sunxi_usb_phy_passby(phy, !SUNXI_USB_PASSBY_EN);
+#ifdef CONFIG_MACH_SUN8I_A83T
+ if (phy->id == 0) {
+ setbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
+ SUNXI_PHY_CTL_SIDDQ);
+ }
+#endif
+
clrbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
}
diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h
index 7c0ab1e..eb5db4e 100644
--- a/include/configs/sun8i.h
+++ b/include/configs/sun8i.h
@@ -20,6 +20,8 @@
#ifdef CONFIG_MACH_SUN8I_H3
#define CONFIG_SUNXI_USB_PHYS 4
+#elif defined CONFIG_MACH_SUN8I_A83T
+ #define CONFIG_SUNXI_USB_PHYS 3
#else
#define CONFIG_SUNXI_USB_PHYS 2
#endif
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.