Hello!! I do not know if the AXP221 is fully supported in the kernel 4.X, I would like to see the status of the battery but I can not see anything on the /sys/class/power_supply/battery directory. any ideas?
Thanks J.C El jueves, 14 de abril de 2016, 8:07:42 (UTC+2), Juan Carlos Barrientos escribió: > > Hello > > In my case this is the tablet colorfly,s hardware: > > -AXP221s D3108CB 6631 (Power Management IC) > -RTL 8188ETV (wifi)- In kernel select: > 1-Networking support -->Wireless > 2-Device drivers -->Staging drivers--> RTL8188 > -Goofix 911 (touchscreen): I have modify suni6-a31s-colorfly-e708.dts > (U-boot,) in order to the goodix gt911 work. Netx calibrate file: > -/usr/share/X11/xorg.conf.d/10-evdev.conf : > Section "InputClass" > Identifier "calibration" > MatchProduct "Goodix Capacitive TouchScreen" > Option "Calibration" "4 1200 800 -1" > Option "SwapAxes" "1" > EndSection. > > -XT1208- Voltage regulator > -I29F64G08AAMEI: Internal flash memory 8GB > -ELPIA J4216BBBG-GN-F (HAY DOS ) DDR3 SDRAM 1GB (2x 512MB) > -CHIP??2011M 130927¿¿¿???? > > > Basicaly i have two hardwarware element,s that don,t work: > > -Amlogic STK8313 3121D 07B37: Accelerometer, i have seen stk8312.c file > but this driver has I2C 2x3D, stk8312 works on i2c 0x22 > kernel/linux-4.6-rc2/drivers/iio/accel ¿any idea how to use or port 8313 > module? > > -Sound: I don,t kwon how works audio codec > > Thanks > J.C > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
