Checking the DMA config before setting the lli list avoids to do tests
inside the setting loop.
Signed-off-by: Jean-Francois Moine <moin...@free.fr>
---
drivers/dma/sun6i-dma.c | 102 ++++++++++++++++++++++--------------------------
1 file changed, 47 insertions(+), 55 deletions(-)
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index 3579ee7..b08245e 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -276,45 +276,6 @@ static void *sun6i_dma_lli_add(struct sun6i_dma_lli *prev,
return next;
}
-static inline int sun6i_dma_cfg_lli(struct sun6i_dma_lli *lli,
- dma_addr_t src,
- dma_addr_t dst, u32 len,
- struct dma_slave_config *config)
-{
- s8 src_width, dst_width, src_burst, dst_burst;
-
- if (!config)
- return -EINVAL;
-
- src_burst = convert_burst(config->src_maxburst);
- if (src_burst < 0)
- return src_burst;
-
- dst_burst = convert_burst(config->dst_maxburst);
- if (dst_burst < 0)
- return dst_burst;
-
- src_width = convert_buswidth(config->src_addr_width);
- if (src_width < 0)
- return src_width;
-
- dst_width = convert_buswidth(config->dst_addr_width);
- if (dst_width < 0)
- return dst_width;
-
- lli->cfg = DMA_CHAN_CFG_SRC_BURST(src_burst) |
- DMA_CHAN_CFG_SRC_WIDTH(src_width) |
- DMA_CHAN_CFG_DST_BURST(dst_burst) |
- DMA_CHAN_CFG_DST_WIDTH(dst_width);
-
- lli->src = src;
- lli->dst = dst;
- lli->len = len;
- lli->para = NORMAL_WAIT;
-
- return 0;
-}
-
static inline void sun6i_dma_dump_lli(struct sun6i_vchan *vchan,
struct sun6i_dma_lli *lli)
{
@@ -502,6 +463,35 @@ static irqreturn_t sun6i_dma_interrupt(int irq, void
*dev_id)
return ret;
}
+static int set_config(struct sun6i_dma_dev *sdev,
+ struct dma_slave_config *sconfig,
+ enum dma_transfer_direction direction,
+ u32 *p_cfg)
+{
+ s8 src_width, dst_width, src_burst, dst_burst;
+
+ src_burst = convert_burst(sconfig->src_maxburst);
+ src_width = convert_buswidth(sconfig->src_addr_width);
+ dst_burst = convert_burst(sconfig->dst_maxburst);
+ dst_width = convert_buswidth(sconfig->dst_addr_width);
+
+ if (src_burst < 0)
+ return src_burst;
+ if (src_width < 0)
+ return src_width;
+ if (dst_burst < 0)
+ return dst_burst;
+ if (dst_width < 0)
+ return dst_width;
+
+ *p_cfg = DMA_CHAN_CFG_SRC_BURST(src_burst) |
+ DMA_CHAN_CFG_SRC_WIDTH(src_width) |
+ DMA_CHAN_CFG_DST_BURST(dst_burst) |
+ DMA_CHAN_CFG_DST_WIDTH(dst_width);
+
+ return 0;
+}
+
static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(
struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
size_t len, unsigned long flags)
@@ -569,6 +559,7 @@ static struct dma_async_tx_descriptor
*sun6i_dma_prep_slave_sg(
struct sun6i_desc *txd;
struct scatterlist *sg;
dma_addr_t p_lli;
+ u32 lli_cfg;
int i, ret;
if (!sgl)
@@ -579,6 +570,12 @@ static struct dma_async_tx_descriptor
*sun6i_dma_prep_slave_sg(
return NULL;
}
+ ret = set_config(sdev, sconfig, dir, &lli_cfg);
+ if (ret) {
+ dev_err(chan2dev(chan), "Invalid DMA configuration\n");
+ return NULL;
+ }
+
txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
if (!txd)
return NULL;
@@ -588,14 +585,14 @@ static struct dma_async_tx_descriptor
*sun6i_dma_prep_slave_sg(
if (!v_lli)
goto err_lli_free;
- if (dir == DMA_MEM_TO_DEV) {
- ret = sun6i_dma_cfg_lli(v_lli, sg_dma_address(sg),
- sconfig->dst_addr,
sg_dma_len(sg),
- sconfig);
- if (ret)
- goto err_cur_lli_free;
+ v_lli->len = sg_dma_len(sg);
+ v_lli->para = NORMAL_WAIT;
- v_lli->cfg |= DMA_CHAN_CFG_DST_IO_MODE |
+ if (dir == DMA_MEM_TO_DEV) {
+ v_lli->src = sg_dma_address(sg);
+ v_lli->dst = sconfig->dst_addr;
+ v_lli->cfg = lli_cfg |
+ DMA_CHAN_CFG_DST_IO_MODE |
DMA_CHAN_CFG_SRC_LINEAR_MODE |
DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) |
DMA_CHAN_CFG_DST_DRQ(vchan->port);
@@ -607,13 +604,10 @@ static struct dma_async_tx_descriptor
*sun6i_dma_prep_slave_sg(
sg_dma_len(sg), flags);
} else {
- ret = sun6i_dma_cfg_lli(v_lli, sconfig->src_addr,
- sg_dma_address(sg),
sg_dma_len(sg),
- sconfig);
- if (ret)
- goto err_cur_lli_free;
-
- v_lli->cfg |= DMA_CHAN_CFG_DST_LINEAR_MODE |
+ v_lli->src = sconfig->src_addr;
+ v_lli->dst = sg_dma_address(sg);
+ v_lli->cfg = lli_cfg |
+ DMA_CHAN_CFG_DST_LINEAR_MODE |
DMA_CHAN_CFG_SRC_IO_MODE |
DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) |
DMA_CHAN_CFG_SRC_DRQ(vchan->port);
@@ -634,8 +628,6 @@ static struct dma_async_tx_descriptor
*sun6i_dma_prep_slave_sg(
return vchan_tx_prep(&vchan->vc, &txd->vd, flags);
-err_cur_lli_free:
- dma_pool_free(sdev->pool, v_lli, p_lli);
err_lli_free:
for (prev = txd->v_lli; prev; prev = prev->v_lli_next)
dma_pool_free(sdev->pool, prev, virt_to_phys(prev));
--
2.8.1
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
