bpi m1+'s i2s/spdif pinout is different with the bpi pro . 2016-05-31 4:26 GMT+08:00 Bernhard Nortmann <bernhard.nortm...@web.de>:
> Am 30.05.2016 um 21:43 schrieb Maxime Ripard: > >> Hi, >> >> On Mon, May 30, 2016 at 08:30:13PM +0800, luoyi...@gmail.com wrote: >> >>> From: luoyi <luoyi...@gmail.com> >>> >>> Add support for the Bananapi M1 Plus A20 development board from >>> sinovoip.com.cn . >>> This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle >>> for >>> OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir >>> receiver, >>> 3.5 mm jack for stero sound out, on board microphone, 40 gpio pins and >>> sdio wifi. >>> >> What is the difference between the M1+ and the M1? >> > > The M1+ is an updated version of the original Banana Pi. If you're > interested > in the details, have a look at http://linux-sunxi.org/Banana_Pi#Variants . > "BPi-M1+" is SinoVoip's counterpart of LeMaker's "Banana Pro", for which a > .dts > already exists. Judging from .fex files, only a single pin assignment > seems to > differ between the two (audio_pa_ctrl, PH26 vs. PH15). > > Regards, B. Nortmann > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.