Hello, comments below.
On 24.6.2016 05:48, Chen-Yu Tsai wrote: > On Fri, Jun 24, 2016 at 3:20 AM, <meg...@megous.com> wrote: >> From: Ondrej Jirman <meg...@megous.com> >> >> Add label to the first cpu so that it can be referenced >> from derived dts files. >> >> Signed-off-by: Ondrej Jirman <meg...@megous.com> >> --- >> arch/arm/boot/dts/sun8i-h3.dtsi | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi >> b/arch/arm/boot/dts/sun8i-h3.dtsi >> index 9938972..82faefc 100644 >> --- a/arch/arm/boot/dts/sun8i-h3.dtsi >> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi >> @@ -52,7 +52,7 @@ >> #address-cells = <1>; >> #size-cells = <0>; >> >> - cpu@0 { >> + cpu0: cpu@0 { >> compatible = "arm,cortex-a7"; >> device_type = "cpu"; >> reg = <0>; > > Can you also set the cpu clock here? It is part of the SoC > and does not belong in the board DTS files. Do you mean operating-points, or something else? Different SBCs will probably require different combinations of operating points just for safety's sake, because they have different regulators and [some have botched] thermal designs, so it might make sense to customize it for differnt boards, and I don't feel adventurous enough setting it for all H3 boards out there. Or is this comment related to the missing cpu clock rate message I see on every boot? [ 0.058912] /cpus/cpu@0 missing clock-frequency property regards, Ondrej > Otherwise this one looks good. > > ChenYu > >> -- >> 2.9.0 >> -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
signature.asc
Description: OpenPGP digital signature