Hi, On Sat, Feb 11, 2017 at 12:08:40PM +0000, Bob Ham wrote: > Hi there, > > I have a Mele A1000G Quad top set box with an Allwinner A31 chip. > Unfortunately, the framebuffer is failing on recent kernels. I have a > 1080p monitor connected to the HDMI output. During boot, the monitor > goes blank and reports "No Signal". > > I've done a git bisect and determined that this is the offending commit: > > # first bad commit: [78a9f0dbcd6015cdd1114dc7d78554fd5bb28010] ARM: dts: > sun6i: switch A31/A31s to new CCU clock bindings > > > On IRC, MoeIcenowy requested the contents > of /sys/kernel/debug/clk/clk_summary. I don't know how useful it will > be but I've put up two versions, one from the bad commit and another > from the previous, good commit in the bisect: > > http://settrans.net/~rah/misc/sun6i-a31-bad-fb-clk_summary-good.txt > http://settrans.net/~rah/misc/sun6i-a31-bad-fb-clk_summary-bad.txt
Are you sure the good one works? None of the display clocks are enabled. Could you add "clk_ignore_unused" to the kernel boot parameters and see if it works? Thanks, Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
signature.asc
Description: PGP signature
