The dwmac-sun8i is an Ethernet MAC that supports 10/100/1000 Mbit
connections. It is very similar to the device found in the Allwinner
H3, but lacks the internal 100 Mbit PHY and its associated control
bits.
This adds the necessary bits to the Allwinner A64 SoC .dtsi, but keeps
it disabled at this level.

Signed-off-by: Corentin Labbe <clabbe.montj...@gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 37 +++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi 
b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 3b09af2..57d69e5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -277,6 +277,23 @@
                                bias-pull-up;
                        };
 
+                       rmii_pins: rmii_pins {
+                               pins = "PD10", "PD11", "PD13", "PD14",
+                                               "PD17", "PD18", "PD19", "PD20",
+                                               "PD22", "PD23";
+                               function = "emac";
+                               drive-strength = <40>;
+                       };
+
+                       rgmii_pins: rgmii_pins {
+                               pins = "PD8", "PD9", "PD10", "PD11",
+                                               "PD12", "PD13", "PD15",
+                                               "PD16", "PD17", "PD18", "PD19",
+                                               "PD20", "PD21", "PD22", "PD23";
+                               function = "emac";
+                               drive-strength = <40>;
+                       };
+
                        uart0_pins_a: uart0@0 {
                                pins = "PB8", "PB9";
                                function = "uart0";
@@ -381,6 +398,26 @@
                        #size-cells = <0>;
                };
 
+               emac: ethernet@1c30000 {
+                       compatible = "allwinner,sun50i-a64-emac";
+                       syscon = <&syscon>;
+                       reg = <0x01c30000 0x100>;
+                       interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "macirq";
+                       resets = <&ccu RST_BUS_EMAC>;
+                       reset-names = "stmmaceth";
+                       clocks = <&ccu CLK_BUS_EMAC>;
+                       clock-names = "stmmaceth";
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       mdio: mdio {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                       };
+               };
+
                gic: interrupt-controller@1c81000 {
                        compatible = "arm,gic-400";
                        reg = <0x01c81000 0x1000>,
-- 
2.10.2

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to