Hi Andre, On Wed, Mar 01, 2017 at 02:25:26AM +0000, Andre Przywara wrote: > The Pine64 (and all other 64-bit Allwinner boards) need to load an > ARM Trusted Firmware image beside the actual U-Boot proper. > This can now be easily achieved by using the just extended SPL FIT > loading support, so enable it in the Pine64 defconfig. > Also add the FIT image as a build target to 64-bit sunxi board to > trigger the respective Makefile rules. > > Signed-off-by: Andre Przywara <andre.przyw...@arm.com> > --- > configs/pine64_plus_defconfig | 6 ++++++ > include/configs/sunxi-common.h | 4 ++++ > 2 files changed, 10 insertions(+) > > diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig > index 7c7d86f..2b47157 100644 > --- a/configs/pine64_plus_defconfig > +++ b/configs/pine64_plus_defconfig > @@ -3,9 +3,14 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y > CONFIG_ARCH_SUNXI=y > CONFIG_MACH_SUN50I=y > CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus" > +CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus" > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > CONFIG_CONSOLE_MUX=y > CONFIG_SPL=y > +CONFIG_FIT=y > +CONFIG_SPL_FIT=y > +CONFIG_SPL_LOAD_FIT=y > +CONFIG_SPL_OF_LIBFDT=y
I'm not sure we want to force down that support to all our users. We should definitely make that easy (basically just switching on an option), for example a few selects here might be good. But switching that on, and only for a few boards seems both weird and inconsistent. > # CONFIG_CMD_IMLS is not set > # CONFIG_CMD_FLASH is not set > # CONFIG_CMD_FPGA is not set > @@ -14,3 +19,4 @@ CONFIG_SPL=y > # CONFIG_SPL_EFI_PARTITION is not set > CONFIG_SUN8I_EMAC=y > CONFIG_USB_EHCI_HCD=y > +CONFIG_SPL_FIT_GENERATOR="board/sunxi/mksunxi_fit_atf.sh" And that could be a default value. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
signature.asc
Description: PGP signature