Hey Marcus,
On 01-03-17 16:10, Marcus Weseloh wrote:
Hi Oliver,
2017-03-01 13:52 GMT+01:00 Olliver Schinagl <oli...@schinagl.nl
<mailto:oli...@schinagl.nl>>:
+#define AXP209_VRC_LDO3_EN BIT(3)
+#define AXP209_VRC_DCDC2_EN BIT(2)
+#define AXP209_VRC_LDO3_800uV_uS (BIT(1) | AXP209_VRC_LDO3_EN)
+#define AXP209_VRC_LDO3_1600uV_uS AXP209_VRC_LDO3_EN
Does that mean that the description of the LDO3/DCDC2 VRC control on the
linux-sunxi wiki [1] and the PDF datasheet [2] are wrong? They say that
VRC for LDO3 is enabled if the bit is 0, disabled when the bit is 1. And
that the default value is enabled.
Yes you are correct (and well spotted) that the datasheet is wrong. It
took us some time to figure out why it wasn't working :)
I thought I updated the wiki, but I must have done it incorrectly. I
will fix it immediatly.
olliver
[1]
http://linux-sunxi.org/AXP209#REG_25H:_DC-DC2.2FLDO3_dynamic_voltage_scaling_parameter_settings
[2] http://dl.linux-sunxi.org/AXP/AXP209_Datasheet_v1.0en.pdf
Cheers,
Marcus
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
