2017年3月1日 23:51于 Maxime Ripard <maxime.rip...@free-electrons.com>写道: > > Hi Andre, > > On Wed, Mar 01, 2017 at 02:25:26AM +0000, Andre Przywara wrote: > > The Pine64 (and all other 64-bit Allwinner boards) need to load an > > ARM Trusted Firmware image beside the actual U-Boot proper. > > This can now be easily achieved by using the just extended SPL FIT > > loading support, so enable it in the Pine64 defconfig. > > Also add the FIT image as a build target to 64-bit sunxi board to > > trigger the respective Makefile rules. > > > > Signed-off-by: Andre Przywara <andre.przyw...@arm.com> > > --- > > configs/pine64_plus_defconfig | 6 ++++++ > > include/configs/sunxi-common.h | 4 ++++ > > 2 files changed, 10 insertions(+) > > > > diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig > > index 7c7d86f..2b47157 100644 > > --- a/configs/pine64_plus_defconfig > > +++ b/configs/pine64_plus_defconfig > > @@ -3,9 +3,14 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y > > CONFIG_ARCH_SUNXI=y > > CONFIG_MACH_SUN50I=y > > CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus" > > +CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus" > > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > > CONFIG_CONSOLE_MUX=y > > CONFIG_SPL=y > > +CONFIG_FIT=y > > +CONFIG_SPL_FIT=y > > +CONFIG_SPL_LOAD_FIT=y > > +CONFIG_SPL_OF_LIBFDT=y > > I'm not sure we want to force down that support to all our users.
A64 boards are now unusable without proper ATF. > > We should definitely make that easy (basically just switching on an > option), for example a few selects here might be good. But switching > that on, and only for a few boards seems both weird and inconsistent. > > > # CONFIG_CMD_IMLS is not set > > # CONFIG_CMD_FLASH is not set > > # CONFIG_CMD_FPGA is not set > > @@ -14,3 +19,4 @@ CONFIG_SPL=y > > # CONFIG_SPL_EFI_PARTITION is not set > > CONFIG_SUN8I_EMAC=y > > CONFIG_USB_EHCI_HCD=y > > +CONFIG_SPL_FIT_GENERATOR="board/sunxi/mksunxi_fit_atf.sh" > > And that could be a default value. > > Maxime > > -- > Maxime Ripard, Free Electrons > Embedded Linux and Kernel engineering > http://free-electrons.com > > -- > You received this message because you are subscribed to the Google Groups > "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to linux-sunxi+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.