The patch regulator: axp20x-regulator: add support for AXP803
has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 1dbe0ccb0631c4ed399261934fe16f07407b078d Mon Sep 17 00:00:00 2001 From: Icenowy Zheng <icen...@aosc.io> Date: Thu, 18 May 2017 15:16:49 +0800 Subject: [PATCH] regulator: axp20x-regulator: add support for AXP803 AXP803 PMIC also have a series of regulators (DCDCs and LDOs) controllable via I2C/RSB bus. Add support for them. Signed-off-by: Icenowy Zheng <icen...@aosc.io> Acked-by: Chen-Yu Tsai <w...@csie.org> Signed-off-by: Mark Brown <broo...@kernel.org> --- drivers/regulator/axp20x-regulator.c | 153 ++++++++++++++++++++++++++++++----- include/linux/mfd/axp20x.h | 37 +++++++++ 2 files changed, 168 insertions(+), 22 deletions(-) diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 0b9d4e3e52c7..e2608fe770b9 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -244,6 +244,82 @@ static const struct regulator_desc axp22x_drivevbus_regulator = { .ops = &axp20x_ops_sw, }; +static const struct regulator_linear_range axp803_dcdc234_ranges[] = { + REGULATOR_LINEAR_RANGE(500000, 0x0, 0x46, 10000), + REGULATOR_LINEAR_RANGE(1220000, 0x47, 0x4b, 20000), +}; + +static const struct regulator_linear_range axp803_dcdc5_ranges[] = { + REGULATOR_LINEAR_RANGE(800000, 0x0, 0x20, 10000), + REGULATOR_LINEAR_RANGE(1140000, 0x21, 0x44, 20000), +}; + +static const struct regulator_linear_range axp803_dcdc6_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0x0, 0x32, 10000), + REGULATOR_LINEAR_RANGE(1120000, 0x33, 0x47, 20000), +}; + +/* AXP806's CLDO2 and AXP809's DLDO1 shares the same range */ +static const struct regulator_linear_range axp803_dldo2_ranges[] = { + REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000), + REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000), +}; + +static const struct regulator_desc axp803_regulators[] = { + AXP_DESC(AXP803, DCDC1, "dcdc1", "vin1", 1600, 3400, 100, + AXP803_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(0)), + AXP_DESC_RANGES(AXP803, DCDC2, "dcdc2", "vin2", axp803_dcdc234_ranges, + 76, AXP803_DCDC2_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1, + BIT(1)), + AXP_DESC_RANGES(AXP803, DCDC3, "dcdc3", "vin3", axp803_dcdc234_ranges, + 76, AXP803_DCDC3_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1, + BIT(2)), + AXP_DESC_RANGES(AXP803, DCDC4, "dcdc4", "vin4", axp803_dcdc234_ranges, + 76, AXP803_DCDC4_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1, + BIT(3)), + AXP_DESC_RANGES(AXP803, DCDC5, "dcdc5", "vin5", axp803_dcdc5_ranges, + 68, AXP803_DCDC5_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1, + BIT(4)), + AXP_DESC_RANGES(AXP803, DCDC6, "dcdc6", "vin6", axp803_dcdc6_ranges, + 72, AXP803_DCDC6_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1, + BIT(5)), + /* secondary switchable output of DCDC1 */ + AXP_DESC_SW(AXP803, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2, + BIT(7)), + AXP_DESC(AXP803, ALDO1, "aldo1", "aldoin", 700, 3300, 100, + AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(5)), + AXP_DESC(AXP803, ALDO2, "aldo2", "aldoin", 700, 3300, 100, + AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(6)), + AXP_DESC(AXP803, ALDO3, "aldo3", "aldoin", 700, 3300, 100, + AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)), + AXP_DESC(AXP803, DLDO1, "dldo1", "dldoin", 700, 3300, 100, + AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)), + AXP_DESC_RANGES(AXP803, DLDO2, "dldo2", "dldoin", axp803_dldo2_ranges, + 32, AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, + BIT(4)), + AXP_DESC(AXP803, DLDO3, "dldo3", "dldoin", 700, 3300, 100, + AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)), + AXP_DESC(AXP803, DLDO4, "dldo4", "dldoin", 700, 3300, 100, + AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(6)), + AXP_DESC(AXP803, ELDO1, "eldo1", "eldoin", 700, 1900, 50, + AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)), + AXP_DESC(AXP803, ELDO2, "eldo2", "eldoin", 700, 1900, 50, + AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)), + AXP_DESC(AXP803, ELDO3, "eldo3", "eldoin", 700, 1900, 50, + AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)), + AXP_DESC(AXP803, FLDO1, "fldo1", "fldoin", 700, 1450, 50, + AXP803_FLDO1_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(2)), + AXP_DESC(AXP803, FLDO2, "fldo2", "fldoin", 700, 1450, 50, + AXP803_FLDO2_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(3)), + AXP_DESC_IO(AXP803, LDO_IO0, "ldo-io0", "ips", 700, 3300, 100, + AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07, + AXP22X_IO_ENABLED, AXP22X_IO_DISABLED), + AXP_DESC_IO(AXP803, LDO_IO1, "ldo-io1", "ips", 700, 3300, 100, + AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07, + AXP22X_IO_ENABLED, AXP22X_IO_DISABLED), + AXP_DESC_FIXED(AXP803, RTC_LDO, "rtc-ldo", "ips", 3000), +}; + static const struct regulator_linear_range axp806_dcdca_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0x0, 0x32, 10000), REGULATOR_LINEAR_RANGE(1120000, 0x33, 0x47, 20000), @@ -254,11 +330,6 @@ static const struct regulator_linear_range axp806_dcdcd_ranges[] = { REGULATOR_LINEAR_RANGE(1600000, 0x2e, 0x3f, 100000), }; -static const struct regulator_linear_range axp806_cldo2_ranges[] = { - REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000), - REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000), -}; - static const struct regulator_desc axp806_regulators[] = { AXP_DESC_RANGES(AXP806, DCDCA, "dcdca", "vina", axp806_dcdca_ranges, 72, AXP806_DCDCA_V_CTRL, 0x7f, AXP806_PWR_OUT_CTRL1, @@ -289,7 +360,7 @@ static const struct regulator_desc axp806_regulators[] = { AXP806_BLDO4_V_CTRL, 0x0f, AXP806_PWR_OUT_CTRL2, BIT(3)), AXP_DESC(AXP806, CLDO1, "cldo1", "cldoin", 700, 3300, 100, AXP806_CLDO1_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL2, BIT(4)), - AXP_DESC_RANGES(AXP806, CLDO2, "cldo2", "cldoin", axp806_cldo2_ranges, + AXP_DESC_RANGES(AXP806, CLDO2, "cldo2", "cldoin", axp803_dldo2_ranges, 32, AXP806_CLDO2_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL2, BIT(5)), AXP_DESC(AXP806, CLDO3, "cldo3", "cldoin", 700, 3300, 100, @@ -326,7 +397,7 @@ static const struct regulator_desc axp809_regulators[] = { AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)), AXP_DESC(AXP809, ALDO3, "aldo3", "aldoin", 700, 3300, 100, AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)), - AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin", axp806_cldo2_ranges, + AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin", axp803_dldo2_ranges, 32, AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)), AXP_DESC(AXP809, DLDO2, "dldo2", "dldoin", 700, 3300, 100, @@ -369,14 +440,21 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) def = 1500; step = 75; break; - case AXP806_ID: + case AXP803_ID: /* - * AXP806 DCDC work frequency setting has the same range and + * AXP803 DCDC work frequency setting has the same range and * step as AXP22X, but at a different register. * Fall through to the check below. * (See include/linux/mfd/axp20x.h) */ - reg = AXP806_DCDC_FREQ_CTRL; + reg = AXP803_DCDC_FREQ_CTRL; + case AXP806_ID: + /* + * AXP806 also have DCDC work frequency setting register at a + * different position. + */ + if (axp20x->variant == AXP806_ID) + reg = AXP806_DCDC_FREQ_CTRL; case AXP221_ID: case AXP223_ID: case AXP809_ID: @@ -475,6 +553,14 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work workmode <<= id - AXP22X_DCDC1; break; + case AXP803_ID: + if (id < AXP803_DCDC1 || id > AXP803_DCDC6) + return -EINVAL; + + mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP803_DCDC1); + workmode <<= id - AXP803_DCDC1; + break; + default: /* should not happen */ WARN_ON(1); @@ -492,20 +578,38 @@ static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id) { u32 reg = 0; - /* Only AXP806 has poly-phase outputs */ - if (axp20x->variant != AXP806_ID) - return false; + /* + * Currently in our supported AXP variants, only AXP803 and AXP806 + * have polyphase regulators. + */ + switch (axp20x->variant) { + case AXP803_ID: + regmap_read(axp20x->regmap, AXP803_POLYPHASE_CTRL, ®); + + switch (id) { + case AXP803_DCDC3: + return !!(reg & BIT(6)); + case AXP803_DCDC6: + return !!(reg & BIT(7)); + } + break; - regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, ®); + case AXP806_ID: + regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, ®); + + switch (id) { + case AXP806_DCDCB: + return (((reg & GENMASK(7, 6)) == BIT(6)) || + ((reg & GENMASK(7, 6)) == BIT(7))); + case AXP806_DCDCC: + return ((reg & GENMASK(7, 6)) == BIT(7)); + case AXP806_DCDCE: + return !!(reg & BIT(5)); + } + break; - switch (id) { - case AXP806_DCDCB: - return (((reg & GENMASK(7, 6)) == BIT(6)) || - ((reg & GENMASK(7, 6)) == BIT(7))); - case AXP806_DCDCC: - return ((reg & GENMASK(7, 6)) == BIT(7)); - case AXP806_DCDCE: - return !!(reg & BIT(5)); + default: + return false; } return false; @@ -540,6 +644,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev) drivevbus = of_property_read_bool(pdev->dev.parent->of_node, "x-powers,drive-vbus-en"); break; + case AXP803_ID: + regulators = axp803_regulators; + nregulators = AXP803_REG_ID_MAX; + break; case AXP806_ID: regulators = axp806_regulators; nregulators = AXP806_REG_ID_MAX; @@ -579,6 +687,7 @@ static int axp20x_regulator_probe(struct platform_device *pdev) * name. */ if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) || + (regulators == axp803_regulators && i == AXP803_DC1SW) || (regulators == axp809_regulators && i == AXP809_DC1SW)) { new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc), GFP_KERNEL); diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index cde56cfe8446..965b027e31b3 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -119,6 +119,17 @@ enum axp20x_variants { #define AXP806_BUS_ADDR_EXT 0xfe #define AXP806_REG_ADDR_EXT 0xff +#define AXP803_POLYPHASE_CTRL 0x14 +#define AXP803_FLDO1_V_OUT 0x1c +#define AXP803_FLDO2_V_OUT 0x1d +#define AXP803_DCDC1_V_OUT 0x20 +#define AXP803_DCDC2_V_OUT 0x21 +#define AXP803_DCDC3_V_OUT 0x22 +#define AXP803_DCDC4_V_OUT 0x23 +#define AXP803_DCDC5_V_OUT 0x24 +#define AXP803_DCDC6_V_OUT 0x25 +#define AXP803_DCDC_FREQ_CTRL 0x3b + /* Interrupt */ #define AXP152_IRQ1_EN 0x40 #define AXP152_IRQ2_EN 0x41 @@ -350,6 +361,32 @@ enum { AXP809_REG_ID_MAX, }; +enum { + AXP803_DCDC1 = 0, + AXP803_DCDC2, + AXP803_DCDC3, + AXP803_DCDC4, + AXP803_DCDC5, + AXP803_DCDC6, + AXP803_DC1SW, + AXP803_ALDO1, + AXP803_ALDO2, + AXP803_ALDO3, + AXP803_DLDO1, + AXP803_DLDO2, + AXP803_DLDO3, + AXP803_DLDO4, + AXP803_ELDO1, + AXP803_ELDO2, + AXP803_ELDO3, + AXP803_FLDO1, + AXP803_FLDO2, + AXP803_RTC_LDO, + AXP803_LDO_IO0, + AXP803_LDO_IO1, + AXP803_REG_ID_MAX, +}; + /* IRQs */ enum { AXP152_IRQ_LDO0IN_CONNECT = 1, -- 2.11.0 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.