The USB PHY can use either a GPIO pin or the PMIC's USB power supply to sense VBUS. Since both options are available on the Cubietruck, add the missing property for the USB power supply to the USB PHY node.
The device tree provides all usable options. Ultimately, which method is used is up to the driver implementation. Signed-off-by: Chen-Yu Tsai <[email protected]> --- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 8dbf732c7aa9..bb510187602c 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -336,6 +336,7 @@ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; -- 2.11.0 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
