To avoid introduction of a new compatible for each small SoC/DMA controller
variation, move the definition of the channel count to the devicetree.

The number of vchans is no longer explicit, but limited by the highest
port/DMA request number. The result is a slight overallocation for SoCs
with a sparse port mapping.

Signed-off-by: Stefan Brüns <stefan.bru...@rwth-aachen.de>
---
 drivers/dma/sun6i-dma.c | 35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index c69dadb853d2..bd4c2e4a759b 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -42,6 +42,9 @@
 
 #define DMA_STAT               0x30
 
+/* Offset between DMA_IRQ_EN and DMA_IRQ_STAT limits number of channels */
+#define DMA_MAX_CHANNELS       (DMA_IRQ_CHAN_NR * 0x10 / 4)
+
 /*
  * sun8i specific registers
  */
@@ -65,7 +68,8 @@
 #define DMA_CHAN_LLI_ADDR      0x08
 
 #define DMA_CHAN_CUR_CFG       0x0c
-#define DMA_CHAN_CFG_SRC_DRQ(x)                ((x) & 0x1f)
+#define DMA_CHAN_MAX_DRQ               0x1f
+#define DMA_CHAN_CFG_SRC_DRQ(x)                ((x) & DMA_CHAN_MAX_DRQ)
 #define DMA_CHAN_CFG_SRC_IO_MODE       BIT(5)
 #define DMA_CHAN_CFG_SRC_LINEAR_MODE   (0 << 5)
 #define DMA_CHAN_CFG_SRC_BURST_A31(x)  (((x) & 0x3) << 7)
@@ -1173,6 +1177,35 @@ static int sun6i_dma_probe(struct platform_device *pdev)
        sdc->num_vchans = sdc->cfg->nr_max_vchans;
        sdc->max_request = sdc->cfg->nr_max_requests;
 
+       ret = of_property_read_u32(np, "dma-channels", &sdc->num_pchans);
+       if (ret && !sdc->num_pchans) {
+               dev_err(&pdev->dev, "Can't get dma-channels.\n");
+               return ret;
+       }
+
+       if (sdc->num_pchans > DMA_MAX_CHANNELS) {
+               dev_err(&pdev->dev, "Number of dma-channels out of range.\n");
+               return -EINVAL;
+       }
+
+       ret = of_property_read_u32(np, "dma-requests", &sdc->max_request);
+       if (ret && !sdc->max_request) {
+               dev_info(&pdev->dev, "Missing dma-requests, using %u.\n",
+                        DMA_CHAN_MAX_DRQ);
+       }
+
+       if (sdc->max_request > DMA_CHAN_MAX_DRQ) {
+               dev_err(&pdev->dev, "Value of dma-requests out of range.\n");
+               return -EINVAL;
+       }
+
+       /*
+        * If the number of vchans is not specified, derive it from the
+        * highest port number, at most one channel per port and direction.
+        */
+       if (!sdc->num_vchans)
+               sdc->num_vchans = 2 * (sdc->max_request + 1);
+
        sdc->pchans = devm_kcalloc(&pdev->dev, sdc->num_pchans,
                                   sizeof(struct sun6i_pchan), GFP_KERNEL);
        if (!sdc->pchans)
-- 
2.14.1

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to