The H83T uses a compatible string different from the A23, but requires
the same clock autogating register setting.
The H3 also requires setting the clock autogating register, but has
the register at a different offset.
Add three suitable callbacks for the existing controller generations
and set it in the controller config structure.
Signed-off-by: Stefan Brüns <stefan.bru...@rwth-aachen.de>
Acked-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---
Changes in v4:
- Correct callback function signature, pass pointer to controller
- sun6i_dma_dev refers to sun6i_dma_config and vice versa, add forward
declaration
- Fix config initialization
Changes in v3:
- Check for callback instead of using a no-op callback
Changes in v2:
- Use callback for autogating instead of variable for different SoC generations
drivers/dma/sun6i-dma.c | 28 +++++++++++++++++++++++-----
1 file changed, 23 insertions(+), 5 deletions(-)
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index bcd496edc70f..6f9d7c4ac7c0 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -48,6 +48,9 @@
#define SUN8I_DMA_GATE 0x20
#define SUN8I_DMA_GATE_ENABLE 0x4
+#define SUNXI_H3_SECURE_REG 0x20
+#define SUNXI_H3_DMA_GATE 0x28
+#define SUNXI_H3_DMA_GATE_ENABLE 0x4
/*
* Channels specific registers
*/
@@ -90,6 +93,9 @@
#define NORMAL_WAIT 8
#define DRQ_SDRAM 1
+/* forward declaration */
+struct sun6i_dma_dev;
+
/*
* Hardware channels / ports representation
*
@@ -111,7 +117,7 @@ struct sun6i_dma_config {
* however these SoCs really have and need this bit, as seen in the
* BSP kernel source code.
*/
- bool gate_needed;
+ void (*clock_autogate_enable)(struct sun6i_dma_dev *);
};
/*
@@ -267,6 +273,16 @@ static inline s8 convert_buswidth(enum dma_slave_buswidth
addr_width)
return addr_width >> 1;
}
+static void sun6i_enable_clock_autogate_a23(struct sun6i_dma_dev *sdev)
+{
+ writel(SUN8I_DMA_GATE_ENABLE, sdev->base + SUN8I_DMA_GATE);
+}
+
+static void sun6i_enable_clock_autogate_h3(struct sun6i_dma_dev *sdev)
+{
+ writel(SUNXI_H3_DMA_GATE_ENABLE, sdev->base + SUNXI_H3_DMA_GATE);
+}
+
static size_t sun6i_get_chan_size(struct sun6i_pchan *pchan)
{
struct sun6i_desc *txd = pchan->desc;
@@ -1020,13 +1036,14 @@ static struct sun6i_dma_config sun8i_a23_dma_cfg = {
.nr_max_channels = 8,
.nr_max_requests = 24,
.nr_max_vchans = 37,
- .gate_needed = true,
+ .clock_autogate_enable = sun6i_enable_clock_autogate_a23,
};
static struct sun6i_dma_config sun8i_a83t_dma_cfg = {
.nr_max_channels = 8,
.nr_max_requests = 28,
.nr_max_vchans = 39,
+ .clock_autogate_enable = sun6i_enable_clock_autogate_a23,
};
/*
@@ -1038,6 +1055,7 @@ static struct sun6i_dma_config sun8i_h3_dma_cfg = {
.nr_max_channels = 12,
.nr_max_requests = 27,
.nr_max_vchans = 34,
+ .clock_autogate_enable = sun6i_enable_clock_autogate_h3,
};
/*
@@ -1049,7 +1067,7 @@ static struct sun6i_dma_config sun8i_v3s_dma_cfg = {
.nr_max_channels = 8,
.nr_max_requests = 23,
.nr_max_vchans = 24,
- .gate_needed = true,
+ .clock_autogate_enable = sun6i_enable_clock_autogate_a23,
};
static const struct of_device_id sun6i_dma_match[] = {
@@ -1199,8 +1217,8 @@ static int sun6i_dma_probe(struct platform_device *pdev)
goto err_dma_unregister;
}
- if (sdc->cfg->gate_needed)
- writel(SUN8I_DMA_GATE_ENABLE, sdc->base + SUN8I_DMA_GATE);
+ if (sdc->cfg->clock_autogate_enable)
+ sdc->cfg->clock_autogate_enable(sdc);
return 0;
--
2.14.1
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
