hi all, i found the cubieboard4 is supported by the official u-boot with Cubieboard4_defconfig, and i have built success with u-boot-2017.09.tar.bz2. next i put the u-boot on board, dd if=u-boot.bin of=/dev/mmcblk1 bs=1k seek=19096, but it can't work, error occur: [mmc]: ***SD/MMC 2 init OK!!!*** sdcard 2 init ok ERROR! NOT find the head of uboot. Ready to disable icache.
i have tried the below binaries, but all fails u-boot.bin u-boot-nodtb.bin u-boot-dtb.bin u-boot-sunxi-with-spl.bin -thanks -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.