I'd say no, do not merge if hardware is not publicly available, make a separate DTS in your separate Tree that extends the board you are closest to with your custom changes.
Cheers! On 7 November 2017 at 13:13, Giulio Benetti <giulio.bene...@micronovasrl.com > wrote: > It's a custom board of my Company. > Its complete dts is not ready, but that part works. > Do I have to submit this when I will submit entire board dts? > If yes, since our board has software open source, but not opensource > hardware, > will you accept our dts in the future? > > Thank you > > Il giorno martedì 7 novembre 2017 14:03:51 UTC+1, Maxime Ripard ha scritto: >> >> On Tue, Nov 07, 2017 at 01:49:59PM +0100, Giulio Benetti wrote: >> > On sun7i-a20-* there's no way to enable PA00--PA27 as RGB888 LCD0 pins. >> > >> > Add lcd_rgb888_pins in sun7i-a20.dtsi. >> > >> > It can be used on sun7i-a20-olinuxino-lime.dts. >> > This patch gives possibility to set parallel lcd pins for RGB888. >> > To be used with tcon0 in your <target>.dts >> >> My question was on which board do you want to use it right now. If the >> answer is none, then we won't merge that patch, we have too many >> pinctrl already to not add the unused ones. >> >> Maxime >> >> -- >> Maxime Ripard, Free Electrons >> Embedded Linux and Kernel engineering >> http://free-electrons.com >> > -- > You received this message because you are subscribed to the Google Groups > "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to linux-sunxi+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.