To use pin PF4 as the RX signal of UART0, we have to write 0b011 into the respective pin controller register. Fix the wrong value we had in our table so far.
Signed-off-by: Andre Przywara <[email protected]> --- drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c index 4f2a726bbaeb..f5f77432ce6f 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c +++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c @@ -428,7 +428,7 @@ static const struct sunxi_desc_pin a64_pins[] = { SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), SUNXI_FUNCTION(0x2, "mmc0"), /* D3 */ - SUNXI_FUNCTION(0x4, "uart0")), /* RX */ + SUNXI_FUNCTION(0x3, "uart0")), /* RX */ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 5), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), -- 2.14.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
