On Thu, Dec 21, 2017 at 9:26 AM, Maxime Ripard <maxime.rip...@free-electrons.com> wrote: > Hi, > > On Thu, Dec 21, 2017 at 09:19:24AM -0600, Kyle Evans wrote: >> On Thu, Dec 21, 2017 at 8:55 AM, Maxime Ripard >> <maxime.rip...@free-electrons.com> wrote: >> > Hi Kyle, >> > >> > On Tue, Dec 19, 2017 at 03:05:23PM -0600, kevan...@ksu.edu wrote: >> >> Allwinner a83t has a 1 KB sid block with efuse for security rootkey and >> >> thermal calibration data, add node to describe it. >> >> >> >> a83t-sid is not currently supported by nvmem/sunxi-sid, but it is >> >> supported in an external driver for FreeBSD. >> >> >> >> Signed-off-by: Kyle Evans <kevan...@ksu.edu> >> > >> > The patch looks fine in itself, but we've had a number of issues with >> > the register layout (and access patterns) in the past, so I'd rather >> > have something that works in Linux too if possible. >> >> I have a patch that I think should make it work fine on Linux [1], but >> I'm afraid I have little to no capability to test it myself and so I >> did not add it as well. >> >> I do know that the rootkey is offset 0x200 into the given space [2], >> as is the case with the H3, and that the readout quirk is not needed. >> I wasn't 100% sure that the a83t has 2Kbit worth of efuse space as the >> H3, but I do know that thermal data can be found at 0x34 and 0x38 in >> this space. > > Then maybe we should leave it aside until someone takes some time on > the A83t. The good news is that the binding itself looks fine, so as > far as FreeBSD goes, there shouldn't be anything preventing you from > using it I guess.
Yeah, we've had this exact binding in our own copy of DTS up until a recent point when we flipped the switch to pulling DT from Mainline Linux and trying to upstream changes instead of having a bunch of local modifications in our tree. > Chen-Yu, what do you think? > > Thanks! > Maxime > > -- > Maxime Ripard, Free Electrons > Embedded Linux and Kernel engineering > http://free-electrons.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.