For adding newer sensor some basic rework of the code is necessary.
The SoCs after H3 has newer thermal sensor ADCs, which have two clock
inputs (bus clock and sampling clock) and a reset. The registers are
also re-arranged.
This commit reworks the code, adds the process of the clocks and
resets.
Signed-off-by: Philipp Rossak <embe...@gmail.com>
Signed-off-by: Icenowy Zheng <icen...@aosc.io>
---
drivers/iio/adc/sun4i-gpadc-iio.c | 80 +++++++++++++++++++++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c
b/drivers/iio/adc/sun4i-gpadc-iio.c
index 363936b37c5a..1a80744bd472 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -22,6 +22,7 @@
* shutdown for not being used.
*/
+#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -31,6 +32,7 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
+#include <linux/reset.h>
#include <linux/thermal.h>
#include <linux/delay.h>
@@ -75,6 +77,9 @@ struct gpadc_data {
u32 ctrl2_map;
u32 sensor_en_map;
u32 filter_map;
+ bool has_bus_clk;
+ bool has_bus_rst;
+ bool has_mod_clk;
};
static const struct gpadc_data sun4i_gpadc_data = {
@@ -134,6 +139,9 @@ struct sun4i_gpadc_iio {
atomic_t ignore_temp_data_irq;
const struct gpadc_data *data;
bool no_irq;
+ struct clk *bus_clk;
+ struct clk *mod_clk;
+ struct reset_control *reset;
/* prevents concurrent reads of temperature and ADC */
struct mutex mutex;
struct thermal_zone_device *tzd;
@@ -435,6 +443,12 @@ static int sun4i_gpadc_runtime_suspend(struct device *dev)
{
struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
+ if (info->data->has_mod_clk)
+ clk_disable(info->mod_clk);
+
+ if (info->data->has_bus_clk)
+ clk_disable(info->bus_clk);
+
return info->data->sample_end(info);
}
@@ -483,6 +497,12 @@ static int sun4i_gpadc_runtime_resume(struct device *dev)
{
struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
+ if (info->data->has_mod_clk)
+ clk_enable(info->mod_clk);
+
+ if (info->data->has_bus_clk)
+ clk_enable(info->bus_clk);
+
return info->data->sample_start(info);
}
@@ -597,10 +617,61 @@ static int sun4i_gpadc_probe_dt(struct platform_device
*pdev,
return ret;
}
+ if (info->data->has_bus_rst) {
+ info->reset = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(info->reset)) {
+ ret = PTR_ERR(info->reset);
+ return ret;
+ }
+
+ ret = reset_control_deassert(info->reset);
+ if (ret)
+ return ret;
+ }
+
+ if (info->data->has_bus_clk) {
+ info->bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (IS_ERR(info->bus_clk)) {
+ ret = PTR_ERR(info->bus_clk);
+ goto assert_reset;
+ }
+
+ ret = clk_prepare_enable(info->bus_clk);
+ if (ret)
+ goto assert_reset;
+ }
+
+ if (info->data->has_mod_clk) {
+ info->mod_clk = devm_clk_get(&pdev->dev, "mod");
+ if (IS_ERR(info->mod_clk)) {
+ ret = PTR_ERR(info->mod_clk);
+ goto disable_bus_clk;
+ }
+
+ /* Running at 6MHz */
+ ret = clk_set_rate(info->mod_clk, 4000000);
+ if (ret)
+ goto disable_bus_clk;
+
+ ret = clk_prepare_enable(info->mod_clk);
+ if (ret)
+ goto disable_bus_clk;
+ }
+
if (IS_ENABLED(CONFIG_THERMAL_OF))
info->sensor_device = &pdev->dev;
return 0;
+
+disable_bus_clk:
+ if (info->data->has_bus_clk)
+ clk_disable_unprepare(info->bus_clk);
+
+assert_reset:
+ if (info->data->has_bus_rst)
+ reset_control_assert(info->reset);
+
+ return ret;
}
static int sun4i_gpadc_probe_mfd(struct platform_device *pdev,
@@ -766,6 +837,15 @@ static int sun4i_gpadc_remove(struct platform_device *pdev)
if (!info->no_irq)
iio_map_array_unregister(indio_dev);
+ if (info->data->has_mod_clk)
+ clk_disable_unprepare(info->mod_clk);
+
+ if (info->data->has_bus_clk)
+ clk_disable_unprepare(info->bus_clk);
+
+ if (info->data->has_bus_rst)
+ reset_control_assert(info->reset);
+
return 0;
}
--
2.11.0
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
